Latest Components

L-Com Simplex SC/UPC to SC/UPC Fiber Optic Patch Cables

Manufacturer

Part #

Category

L-Com Simplex SC/UPC to SC/UPC Fiber Optic Patch Cables Connectors

Description

Simplex fiber optic patch cables with SC/UPC connectors on both ends for reliable single-fiber data transmission. They feature robust jacket options, push-pull locking connectors, a 2 mm cable diameter, and maximum insertion loss of 0.3 dB.

SNGS Low Hardness Conductive Elastomers

Manufacturer

Part #

Category

TE Connectivity SNGS Passives

Description

TE Connectivity SNGS Low Hardness Conductive Elastomers are soft silicone nickel graphite materials designed for EMI shielding and environmental sealing. With 40 Shore hardness, they provide reliable shielding and sealing with low compression force and accommodate component height variation. They are available in extrusion and molding grades for automotive, medical, data, connectivity, energy, and other applications.

conga-HPC/cPTL COM-HPC Client Size A Module

Manufacturer

Part #

Category

congatec conga-HPC/cPTL Semiconductors

Description

The congatec conga-HPC/cPTL is a COM-HPC Client Size A module based on Intel Core Ultra Series 3 processors, featuring PCIe Gen 5, USB 4, LPCAMM2 LPDDR5 memory, and an integrated NPU. It provides up to 180 TOPS of energy-efficient embedded computing performance and operates across an extended industrial temperature range of -40°C to +85°C. The module is designed for high-performance embedded, edge computing, AI, industrial automation, robotics, medical, and transportation applications.

ePower-Lite Mini X Connectors

Manufacturer

Part #

Category

Amphenol Industrial ePower-Lite Mini X Connectors

Description

Compact two-position high-voltage connectors designed for space-constrained electrification applications. They support up to 1000VDC and 25A with 2.5mm² wire or 35A with 4mm² wire, with optional HVIL and EMI shielding, IP67/IP6K9K sealing, and touch-safe protection.

Ultra-Wide Band Antenna and Evaluation Board

Manufacturer

Part #

Category

TE Connectivity L001016-01 Passives

Description

TE Connectivity's Ultra-Wide Band antenna and evaluation board supports UWB Channels 9 and 10 across the 7737.6 MHz to 8736.0 MHz frequency range. It features a wide angle of arrival range exceeding 120°, greater than 60% average efficiency, peak gain of 3.4 dBi, and maximum VSWR below 2:1. Applications include motion and presence detection, obstacle detection, collision avoidance, RTLS, navigation, and secure access.

L-Com Simplex LC to UPC Fiber Optic Patch Cables

Manufacturer

Part #

Category

L-Com Connectors

Description

Single-mode simplex fiber optic patch cables with LC and UPC connectors for high-speed, high-bandwidth data transmission. They feature a 2 mm cable diameter and are available in 1 m, 3 m, 5 m, 7 m, and 10 m lengths.

MAG-3002177 Power Inductors

Manufacturer

Part #

Category

Bourns MAG-3002177 Passives

Description

Bourns MAG-3002177 single-phase power inductors are designed for high-efficiency and high-power-density operation in the Texas Instruments TIDA-010954 600W GaN-based cycloconverter reference design. They feature 3.2 µH inductance, low 7.63 mΩ typical DCR, and high saturation current for inverters, microinverters, and portable battery storage applications.

DCL321C00(T,E(S) Low Power Dual Channel Digital Isolator

Manufacturer

Part #

Category

Toshiba DCL321C00(T,E(S Semiconductors

Description

The Toshiba DCL321C00(T,E(S) is a two-channel low-power digital isolator with a 25 Mbps data rate and 1:1 channel configuration. It provides 3000 Vrms isolation and operates from a 2.25 V to 5.5 V supply over a -40°C to +125°C temperature range.

ISOTMP35R/-Q1 Analog Temperature Sensors

Manufacturer

Part #

Category

Texas Instruments ISOTMP35R/-Q1 Sensors

Description

Reinforced isolated analog temperature sensor ICs with an integrated isolation barrier and 10mV/°C output slope with a 500mV offset at 0°C. They operate from 3.1V to 34V, provide 5kVRMS reinforced isolation, and support temperature measurement from -40°C to +150°C. The ISOTMP35R-Q1 version is AEC-Q100 qualified for automotive applications.

Sanyo Denki San Ace 52 9RA 52mm x 15mm Low Noise DC Fans

Manufacturer

Part #

Category

Sanyo Denki San Ace 52 9RA Power

Description

Low-noise 52mm x 15mm DC fans designed for efficient cooling in low-power equipment such as medical devices, inverters, chip mounters, servo amplifiers, and switching power supplies. They operate from 5V to 24V with rated input power from 0.3W to 0.53W and a temperature range of -20°C to +70°C.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 540