QBiX-Pro-ADLA1255H-A2 Industrial System

Introduction

The GIGAIPC QBiX-Pro-ADLA1255H-A2 is a fanless industrial computer in the QBiX-Pro series, built around an Intel Core i7-1255U processor. It combines a compact 178 × 125 × 52.7 mm enclosure with configurable memory, storage, networking, display, and legacy I/O options. Its broad 9 VDC to 36 VDC input range, dual 2.5GbE ports, and dual HDMI 2.0 outputs make it a flexible embedded-system platform where a fanless architecture and a compact footprint are important.

What it does

The system uses a 10-core, 12-thread Intel Core i7-1255U processor with frequencies up to 4.7 GHz, alongside Intel Iris Xe Graphics. Two DDR4 SO-DIMM sockets support dual-channel DDR4-3200 memory, with up to 64 GB total capacity.

For network-connected installations, the QBiX-Pro-ADLA1255H-A2 provides two Intel I226V 2.5GbE LAN ports. It can drive two independent HDMI 2.0 displays, supporting resolutions up to 4096 × 2160 at 60 Hz.

Storage provisions include a 2.5-inch SATA 6 Gb/s HDD or SSD bay and a 2280 M.2 M-Key slot supporting PCIe Gen 4 x4 and SATA 6 Gb/s devices. An M.2 E-Key slot and a full-size Mini PCIe slot with SIM support provide further expansion options. The I/O complement includes four USB 3.2 Gen 2x1 ports, two USB 2.0 ports, three configurable serial connections, and an 8-bit GPIO interface.

Applications

• Dual-display industrial workstations and control interfaces
• Embedded systems requiring wired 2.5GbE connectivity
• Compact multi-interface computing platforms with serial and GPIO requirements
• Systems integrating SATA or M.2 storage and additional PCIe-based peripherals
• Installations using a 9 VDC to 36 VDC power source

Design considerations

The fanless system is intended for operation from 0°C to 50°C and 0% to 90% non-condensing humidity. Its DC input accepts +9 VDC to +36 VDC, while the listed power adapter is rated at 19.5 V and 135 W; power planning should account for the intended installation supply and attached peripherals.

Memory is not integrated: the two SO-DIMM sockets require compatible DDR4-3200 modules, up to the 64 GB platform limit. Storage and wireless or expansion choices also need to be selected for the available interfaces: a 2.5-inch SATA bay, M.2 M-Key slot, M.2 E-Key slot, and full-size Mini PCIe slot with SIM slot.

For physical integration, the enclosure measures 178W × 125D × 52.7H mm. The stated operating vibration and shock conditions are specified with SSD or M.2 2280 storage, so storage choice is relevant where mechanical loading is a design concern. Serial integration should also consider the front-port configuration, which supports RS-232/422/485 and RI/5V/12V, versus the two rear RS-232/422/485 ports.

Availability and further information

The Mouser Electronics source link on this page and the linked datasheet provide further product information, including interface details, mechanical information, and environmental specifications.