QBiX-Pro-ARUA2x5H-A1 Industrial Embedded Systems

Introduction

GIGAIPC QBiX-Pro-ARUA2x5H-A1 systems are fanless industrial embedded box PCs in the QBiX-Pro series. They combine an Intel Core Ultra 5 225U or Core Ultra 7 255U processor option with DDR5 memory, dual HDMI 2.1 outputs, dual 2.5GbE networking, and broad wired I/O in a compact 178mm × 125mm × 52.7mm enclosure.

The platform is notable for bringing high-resolution display support, multi-network connectivity, serial communications, and several storage and expansion paths into a fanless system designed for a +9VDC to +36VDC power input.

What it does

The QBiX-Pro-ARUA2x5H-A1 provides a compact computing platform for embedded installations that require local processing, display output, network connectivity, and peripheral interfacing.

It supports dual-channel DDR5 memory through two SO-DIMM or CSO-DIMM slots. Two HDMI 2.1 ports can drive displays at up to 7680 × 4320 at 60Hz. Network connectivity is provided by two 2.5GbE LAN ports.

For storage and expansion, the system supports one 2.5-inch SATA HDD or SSD, along with an M.2 2280 M-key slot supporting PCIe Gen 4x4 and SATA 6Gb/s. An M.2 2230 E-key slot and a full-size mini PCIe slot with SIM support extend the available integration options.

Peripheral connectivity includes four USB 3.2 Gen 2x1 ports, two USB 2.0 ports, three configurable serial interfaces, and an 8-bit GPIO connection. The system also includes an onboard TPM v2.0 and a Realtek ALC269 audio codec.

Applications

• Industrial human-machine interface and multi-display operator terminals
• Network-connected control or monitoring systems requiring dual Ethernet interfaces
• Embedded systems that integrate serial-connected equipment using RS-232, RS-422, or RS-485
• Edge systems requiring local SATA or M.2 storage
• Compact installations with a wide-range DC power source
• Connected embedded platforms using mini PCIe expansion with a SIM slot

Design considerations

The fanless architecture may suit installations where active cooling hardware is undesirable, while the specified operating temperature range is 0°C to 50°C. System designers should account for the unit’s 178mm × 125mm × 52.7mm dimensions and ensure that the available enclosure space supports required cable routing for two HDMI outputs, two LAN ports, USB devices, and serial connections.

Power integration requires a DC source within the specified +9VDC to +36VDC range. Memory must be selected for the two supported SO-DIMM or CSO-DIMM positions, and storage planning can use the 2.5-inch SATA bay, the 2280 M-key M.2 slot, or both as required. The M.2 E-key and full-size mini PCIe/SIM-capable slot provide additional expansion choices, but allocation of these interfaces should be considered early in the system design.

Availability and further information

Further technical information is available through the Mouser Electronics source link and any datasheet links provided on this page.