Genesis GEN.4.4C 4-in-1 Cellular Antennas

Introduction

Taoglas’ Genesis GEN.4.4C series is a low-profile, adhesive-mount 4-in-1 external antenna platform intended to consolidate wideband cellular and Wi-Fi connectivity into one enclosure. Covering 617 MHz to 7125 MHz, the series addresses 5G, 4G/LTE, and Wi-Fi 6E frequency requirements while using a compact IP67-rated housing suited to exposed automotive and industrial installations.

What it does

The GEN.4.4C integrates four antenna elements in a single omni-directional, linearly polarized external antenna assembly. Its broad frequency coverage supports connectivity across cellular and Wi-Fi bands without requiring separate external antenna housings for each function.

Each antenna assembly uses 2 m low-loss TGC-200 cables terminated in SMA male connectors, with a 50 Ω impedance for integration with compatible RF equipment. The specified maximum input power is 10 W.

The enclosure measures 205 mm × 68 mm × 12.5 mm, combining a relatively low profile with adhesive mounting. Its IP67 enclosure rating and specified operating range of -40 °C to +85 °C make the series relevant where antennas may encounter dust, water exposure, and wide ambient-temperature variation.

Applications

• Vehicle-mounted 5G or 4G/LTE communication equipment
• Industrial gateways and remote monitoring systems
• Cellular-connected routers and edge-computing installations
• Wi-Fi 6E and cellular combination connectivity systems
• Equipment requiring four external RF connections from a single adhesive-mounted antenna housing

Design considerations

• The antenna is designed for adhesive mounting, so the intended installation surface and available footprint should accommodate its 205 mm length and 68 mm width.
• Integration requires equipment with SMA male-compatible RF connections and 50 Ω antenna ports.
• The four 2 m TGC-200 cable runs should be accounted for in enclosure layout, cable routing, and connector placement.
• The specified IP67 enclosure and -40 °C to +85 °C operating range are relevant for installations exposed to challenging outdoor, vehicle, or industrial conditions.
• RF performance is frequency-dependent: specified average gain ranges from -17.3 dB to -5.11 dB, while peak gain ranges from -1.33 dBi to 8.50 dBi. System designers should evaluate antenna placement and the required operating bands in the finished product.

Availability and further information

Further product details, including documentation for the GEN.4.4C series, are available through the Mouser Electronics source link and the datasheet link provided on this page.