ASEK-35 Programmer

Introduction

The Allegro MicroSystems ASEK-35 is a dedicated programmer and evaluation interface for the company’s programmable current-sensor portfolio. Positioned in the ASEK-30 series, it is designed to support current-sensor calibration through Two-Point Programming, providing a link between a sensor and a graphical user interface (GUI).

Its technically relevant feature is a modular architecture that can be expanded with Interface and Accessory Boards, allowing the programmer setup to be adapted around supported sensor programming and evaluation requirements.

What it does

ASEK-35 is intended to program and calibrate Allegro programmable current sensors. It provides the communication path between the sensor under test and a GUI, supporting a calibration workflow based on Two-Point Programming.

Two-Point Programming uses two calibration points as part of the sensor-programming process. In this role, the ASEK-35 serves as a dedicated interface rather than as a current sensor itself. Its expansion support for Interface and Accessory Boards enables functional additions to the base programmer platform.

Applications

• Calibration of compatible Allegro programmable current sensors
• Sensor programming and configuration during development
• Evaluation setups linking a supported sensor to a GUI
• Test and characterization benches for programmable current-sensor designs
• Modular programming fixtures using applicable Interface and Accessory Boards

Design considerations

The ASEK-35 should be considered as part of a sensor-programming system rather than a standalone sensing component. Integration requires a compatible Allegro programmable current sensor and use of the GUI communication workflow.

Its modular design is an important consideration for fixture planning: Interface and Accessory Boards may be required or useful depending on the sensor being programmed and the desired evaluation arrangement. Designers should therefore confirm compatibility between the programmer, selected boards, sensor device, and software environment before establishing a calibration setup.

Availability and further information

Further product information is available through the Mouser Electronics source link and Allegro MicroSystems manufacturer link provided on this page. These resources can be used to review supported programming arrangements, interface options, and applicable documentation for the ASEK-35.