EMI Filter & ESD Protection ICs - STMicroelectronics
Semiconductors

EMI Filter & ESD Protection ICs

STMicroelectronicsTCC-2026-10-19-emi-filter-esd-protection-ics

Integrated low-pass EMI/RFI filters with ESD protection up to 20 kV, offered in 2-, 3-, 4-, 6-, and 8-line configurations.

Avnet Silica Farming

Introduction

STMicroelectronics’ EMI filter and ESD protection IC line combines interference filtering and transient protection in a single monolithic device. The components integrate symmetrical low-pass filters with ESD protection for interference-sensitive electronics, reducing the need to implement these functions with separate parts.

The line includes 2-, 3-, 4-, 6-, and 8-line configurations. Wafer-level packaging and monolithic integration are intended to reduce PCB space and parasitic elements compared with a solution assembled from discrete filtering and protection components.

What it does

Each device provides symmetrical input/output low-pass filtering to suppress EMI and RFI on multiple signal lines. Integrated ESD protection is rated up to 20 kV, with protection specified to IEC 61000-4-2 level 4.

The available line counts allow a device to be selected according to the number of signals requiring filtering and protection. Because both functions are integrated, the product line is suited to designs where board area and parasitic effects are important integration concerns.

Some devices in the line are AEC-Q101 qualified, providing options for automotive designs that require that qualification. This qualification does not apply to every device, so the status of the specific part should be confirmed during selection.

Applications

Potential applications based on the stated filtering and protection functions include:

  • EMI and RFI suppression on interference-sensitive signal lines
  • ESD protection for multi-line electronic interfaces
  • Compact designs requiring combined filtering and transient protection
  • Two- to eight-line I/O groups requiring symmetrical low-pass filtering
  • Automotive electronics using an AEC-Q101-qualified device from the line

Design considerations

The required line count is a primary selection factor, with options ranging from two to eight lines. Designers should also verify the electrical and package details of the individual device, since the product line includes several configurations and package options.

The quoted ESD capability is up to 20 kV, so the rating of the selected device should be checked rather than assumed across the entire line. Likewise, AEC-Q101 qualification is available only for some devices.

Wafer-level packaging can support space-conscious layouts, while monolithic integration reduces parasitic elements. PCB routing and interface requirements should be evaluated against the characteristics of the particular filter selected.

Availability and further information

The Mouser Electronics source link on this page provides further product-line information. Consult any linked STMicroelectronics datasheet for device-specific package, electrical, ESD, line-count, and qualification details before selecting a part.

Data

Specifications

ManufacturerSTMicroelectronics
Part numberTCC-2026-10-19-emi-filter-esd-protection-ics
TechnologyMonolithic integration with wafer-level packaging
Release date2026-10-19
Filter typeSymmetrical (I/O) low-pass filter
Line-count options2, 3, 4, 6, and 8 lines
ESD surge protectionUp to 20 kV
Automotive qualificationSome devices are AEC-Q101 qualified
ESD suppression standardIEC 61000-4-2 level 4