Latest Components
Manufacturer
Part #
Category
Quantic Evans THQ Hybrid Capacitors PassivesDescription
Quantic Evans THQ Hybrid Capacitors feature sintered tantalum anodes and ruthenium oxide-coated cathodes in a hermetically sealed tantalum case. They offer a capacitance range of 1100μF to 200,000μF and a rated voltage range of 10VDC to 125VDC. These capacitors are suitable for applications in military, space, industrial, and energy sectors.
Manufacturer
Part #
Category
TDK Corporation ADL4524VL PassivesDescription
TDK has launched its ADL4524VL series of wire-wound inductors designed for automotive power-over-coax applications. These inductors feature a wide frequency range beyond 1 GHz and are suitable for high temperature environments, supporting operation from -55 °C to +155 °C. The innovative design reduces the footprint by minimizing the number of inductors required for effective power and data signal separation.
Manufacturer
Part #
Category
Vishay / Dale WSKP0612 PassivesDescription
Vishay / Dale WSKP0612 Power Metal Strip® Resistors utilize a proprietary processing technique to achieve low resistance values. These surface-mount resistors offer a power rating of 3.5W to 5W, with tolerances of 1.0±% and 5.0±%. They are AEC-Q200 qualified and suitable for applications such as current sensing and voltage division.
Manufacturer
Part #
Category
Proterial FT-3TL PassivesDescription
Proterial FINEMET® FT-3TL Non-Cut Cores utilize nanocrystal soft magnetic material, ensuring a lower loss of 1/3 to 1/4 compared to the F3CC series. They feature a high saturation magnetic flux density, resulting in a smaller size and lighter weight for high-frequency transformers. Available in different sizes, these cores are designed to meet various project needs.
Manufacturer
Part #
Category
Vishay RNC55 PassivesDescription
Vishay RNC55 Metal Film Resistors are MIL-PRF-55182 qualified and offer a very low noise rating of -40dB. They feature an epoxy coating for superior moisture protection and a verified failure rate. With a maximum working voltage of 350V and tolerances of ±0.1%, ±0.5%, and ±1%, these resistors are ideal for precision applications.
Manufacturer
Part #
Category
Bourns CR01005A-AS PassivesDescription
Bourns CR01005A-AS AEC-Q200 Chip Resistors offer a sulfur-resistant design in an extremely small package size of only 0.4mm x 0.2mm x 0.13mm. These robust resistors provide enhanced resistance to corrosion-related failures, improving system stability and reliability. Ideal for applications requiring miniaturization and high reliability, they are suitable for harsh environments such as transportation and wearable devices.
Manufacturer
Part #
Category
TE Connectivity FWFU PassivesDescription
TE Connectivity's Holsworthy FWFU Fusible Wire Wound Fixed Resistors are a special type of resistor that also acts as a safety fuse. They allow current to flow normally but break the circuit when the current exceeds a safe level, protecting electronic devices from damage. These resistors are commonly used in power supplies, chargers, and household appliances to help prevent overheating and short circuits.
Manufacturer
Part #
Category
Taoglas SGGP & SGPDF PassivesDescription
Taoglas SGGP and SGPDF GPS / GLONASS / Galileo / BeiDou Antennas are compact ceramic passive patch antennas designed for space-constrained applications. They feature a low-profile design and are optimized for a 50mm x 50mm ground plane, making them ideal for wearables and navigation devices. Both series are RoHS and REACH compliant, ensuring durability and performance.
Manufacturer
Part #
Category
Taoglas DSGP PassivesDescription
Taoglas DSGP GPS / Galileo / BeiDou Antennas are designed for space-constrained applications with a low-profile height of 2mm or 4mm. These SMT mountable ceramic passive patch antennas feature an additional solder mask for enhanced durability. They are optimized for a 50mm x 50mm ground plane and are compliant with RoHS and REACH standards.
Manufacturer
Part #
Category
Abracon AMELH4030S PassivesDescription
Abracon AMELH4030S Power Inductors are flat wire/hot-press molded power inductors with inductance ranging from 0.13μH to 8.2μH. These inductors feature low DCR, high saturation current, and ultra-low AC losses, making them suitable for consumer electronics, industrial electronics, and telecom equipment. They provide improved efficiency and thermal performance, supporting higher load currents and superior EMI suppression.
