Latest Components
Manufacturer
Part #
Category
Knowles 3825YA PassivesDescription
Compact, low-profile surface-mount safety multilayer ceramic capacitors featuring FlexiCap™ technology to reduce cracking risk. They meet UL and TUV safety standards and are suitable for AC-DC power supplies, modems, networking equipment, electric vehicle high-voltage battery systems, and transient protection applications.
Manufacturer
Part #
Category
Chip Quik DECSIL-10CC-UV PassivesDescription
Translucent, electronics-grade, non-curing dielectric silicone grease with an ultraviolet tracer. It is water- and moisture-resistant, provides corrosion protection, and lubricates and seals electronic and mechanical parts across a -57°C to +204°C operating temperature range.
Manufacturer
Part #
Category
Chip Quik NC5SW020-1LB PassivesDescription
No-clean synthetic flux core solder wire with a Sn10/Pb88/Ag2 alloy and 2.2% flux core. The 0.020-inch wire has a 268°C to 290°C melting point, making it suitable for step soldering, high-temperature environments, and silver-coated surfaces.
Manufacturer
Part #
Category
HellermannTyton 556-00064 PassivesDescription
TagPrint Pro 5 is label printing software that supports WYSIWYG label creation, barcoding, serialization, label sets, wire lists, and graphics. It provides print automation for simultaneous printing to multiple printers and supports applications including industrial automation, data centers, cable assembly, and electrical contracting.
Manufacturer
Part #
Category
Vishay / Sfernice TS4Y PassivesDescription
The Vishay / Sfernice TS4Y series consists of 4.0 mm square, single-turn, surface-mount cermet trimmers for industrial applications. They are fully sealed for board washing, compatible with vacuum pick-and-place equipment, and available with J-hook or gull-wing configurations. The trimmers are rated at 0.25 W at 70°C.
Manufacturer
Part #
Category
Dielectric Laboratories / Knowles ADP12054 PassivesDescription
The Dielectric Laboratories / Knowles ADP12054 is a compact surface-mount diplexer designed for SATCOM bands centered at 11.75 GHz and 19.25 GHz. It features low-loss, temperature-stable materials, a shielded stainless steel cover, 50 Ω impedance, and operation from -55°C to +125°C.
Manufacturer
Part #
Category
Dielectric Laboratories / Knowles B117NB5S PassivesDescription
The B117NB5S is a compact, shielded surface-mount bandpass filter designed for the SATCOM band centered at 11.725 GHz. It features low-loss, temperature-stable materials, 50 Ω characteristic impedance, and operation from -55°C to +125°C.
Manufacturer
Part #
Category
Knowles Dielectric Labs B140MB4S PassivesDescription
The Knowles Dielectric Labs B140MB4S is a surface-mount bandpass filter with a frequency range of 13.75 GHz to 14.5 GHz. It features 50-ohm impedance and operates from -55 °C to +125 °C.
Manufacturer
Part #
Category
Knowles Dielectric Labs ADP12055 PassivesDescription
A compact surface-mount RF diplexer designed for SATCOM bands centered at 11.75 GHz and 14.1 GHz. It provides low-loss, temperature-stable signal separation from -55°C to +125°C and features a 50-ohm impedance.
Manufacturer
Part #
Category
Bourns FBN1606N360D6, FBN2009N090D6, FBN2009N185D6, FBN2009N230D6 PassivesDescription
Compact low-temperature co-fired ceramic RF baluns that provide balanced-to-unbalanced signal conversion and impedance transformation for wireless communication and positioning applications. The series supports 50Ω unbalanced port impedance, up to 3W power, and frequency ranges from 800MHz to 3900MHz.
