Latest Components
Manufacturer
Part #
Category
STMicroelectronics SGT080R70ILB PowerDescription
STMicroelectronics SGT080R70ILB E-Mode PowerGaN Transistor is an enhancement-mode transistor designed for high-efficiency power conversion applications. It features a drain-source voltage rating of 700V and a typical on-resistance of just 80mΩ, leveraging Gallium Nitride (GaN) technology for superior performance. This compact transistor is ideal for use in resonant converters, power factor correction stages, and DC-DC converters.
Manufacturer
Part #
Category
CUI Inc DDP2-M Series PowerDescription
CUI Inc DDP2-M Series DC/DC Converters are 2W converters that operate at 1500V DC isolation voltage. They offer a single unregulated output and include Continuous Short-Circuit Protection (SCP). Suitable for ITE and industrial applications, these converters are housed in an SMT8 package and operate within a temperature range of -40°C to 105°C.
Manufacturer
Part #
Category
Analog Devices Inc. ADAR4002 PowerDescription
The Analog Devices ADAR4002 is a low-power, broadband, bidirectional, single-channel true time delay unit (TDU) and digital step attenuator (DSA) with a frequency range of 0.5GHz to 19GHz. It features programmable time delays and attenuation, making it suitable for applications in electronic steerable antenna arrays and satellite communications. The device operates over a temperature range of -40°C to +85°C.
Manufacturer
Part #
Category
NXP Semiconductors MCSXTM4CK344 / MCDXTM4CK344 PowerDescription
The NXP Semiconductors S32K344 Motor Control Development Kits are designed for rapid prototyping and evaluation of high-power 48V applications. They utilize a 32-bit Arm Cortex-M7 microcontroller to control various motor types, making them ideal for automotive and industrial applications. These kits enable manufacturers to accelerate development for applications like starter generators and eBikes.
Manufacturer
Part #
Category
Analog Devices Inc. ADM1273 PowerDescription
The Analog Devices ADM1273 High-Voltage Positive Hot-Swap Controllers are designed for safe insertion and removal of circuit boards in live backplanes, operating at voltages from 16V to 100V. They integrate a hot-swap controller, current sense amplifier, and power monitoring ADC for precise control and telemetry. Ideal for telecom, industrial, and data center applications, these controllers offer programmable current and voltage limits for tailored protection.
Manufacturer
Part #
Category
Microchip Technology EV14L29A PowerDescription
The Microchip PIC16F17576 Curiosity Nano Board is designed to evaluate the capabilities of the PIC16F17576, a low-power 8-bit microcontroller. It integrates low-power architecture with advanced digital peripherals, making it ideal for mixed-signal and sensor solutions. This compact evaluation kit supports full program and debug capabilities, enabling users to develop their next design easily.
Manufacturer
Part #
Category
STMicroelectronics EVLGANSPIN1-3PH PowerDescription
The STMicroelectronics EVLGANSPIN1-3PH Reference Design Board is based on the GANSPIN611 half-bridge GaN system-in-package and the STM32G431RB with Arm Cortex-M4 MCU. It enables sensorless field-oriented control for driving permanent magnet synchronous motors and brushless DC motors in various applications. This board is ideal for home appliances, factory automation, and power tools.
Manufacturer
Part #
Category
Infineon Technologies REFWATERPUMP150W PowerDescription
Infineon Technologies REFWATERPUMP150W 12V Reference Design is specifically tailored for 150W water pump applications. It integrates a System-on-Chip solution with an Arm Cortex-M23 core, LIN transceiver, bridge driver, and power supply for sensorless FOC. The design includes high-performance OptiMOS 7 MOSFETs for efficient operation.
Manufacturer
Part #
Category
Fanstel BC15 PowerDescription
Fanstel Compact BC15 BLUETOOTH® 6.0 Modules are ultra-low-power Bluetooth Low Energy (BLE) devices utilizing a Nordic nRF54L15 SoC. They feature an Arm Cortex-M33 MCU, 1.524MB flash, and 256KB RAM, making them highly flexible for various applications. The modules come with an integrated chip antenna or a u.FL connector for external antennas, enabling a compact design.
Manufacturer
Part #
Category
Advanced Energy / SL Power SLB350 PowerDescription
The SLB350 Power Supplies are high-performance AC-DC power supplies designed for industrial-grade applications, providing up to 350W of power. They operate within an 85VAC to 264VAC input voltage range with a typical efficiency of 90%. The power supplies feature multiple protection mechanisms and are RoHS compliant.
