Latest Components
Manufacturer
Part #
Category
Texas Instruments LP5815 PowerDescription
The Texas Instruments LP5815 3-Channel I2C Interface RGBW LED Driver features an autonomous animation engine and controllable Instant Blinking. It operates with ultra-low current consumption and allows for precise LED brightness control through analog and PWM dimming methods.
Manufacturer
Part #
Category
STMicroelectronics DCP3601 PowerDescription
STMicroelectronics DCP3601 Synchronous Buck Converters can drive up to 1A load current with an input range from 3.3V to 36V, making it suitable for various industrial applications. It operates at a 1MHz fixed switching frequency, allowing for the use of small inductors. The device includes features such as overcurrent protection, overtemperature protection, and output overvoltage protection.
Manufacturer
Part #
Category
STMicroelectronics STGWA30IH160DF2 PowerDescription
The STMicroelectronics STGWA30IH160DF2 is a 1600V IGBT designed with an advanced trench gate field-stop structure, optimizing conduction and switching losses for soft commutation. It features a low forward voltage drop freewheeling diode and is ideal for resonant and soft-switching applications. The device comes in a TO-247 long lead package.
Manufacturer
Part #
Category
Littelfuse CPC2501M PowerDescription
The Littelfuse CPC2501M Solid State Relay is a normally closed (1-Form-B) relay designed to control and manage relay states based on applied voltage. It features a fast response time of 170µs and can handle a continuous load current of 1.84A. This relay is ideal for applications such as door chime bypass, building automation, and Internet of Things (IoT).
Manufacturer
Part #
Category
onsemi NVBG050N170M1 PowerDescription
The onsemi NVBG050N170M1 Silicon Carbide (SiC) MOSFET is optimized for fast switching applications with a maximum 76mΩ @ 20V and a drain-to-source voltage of 1700V. It features a continuous drain current of 50A and ultra-low gate charge, making it suitable for applications like flyback converters and automotive DC-DC converters. This MOSFET is 100% avalanche tested and RoHS compliant.
Manufacturer
Part #
Category
Texas Instruments TPS2HC120-Q1 PowerDescription
The Texas Instruments TPS2HC120-Q1 Smart High-Side Switch is an automotive dual-channel switch designed for 12V battery systems. It features low R<sub>ON</sub> (120mΩ) for minimal power dissipation and includes protection features like thermal shutdown and current limit. This device is ideal for applications such as ADAS modules and body control modules.
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-ADHV4710SDZ PowerDescription
The Analog Devices EVAL-ADHV4710SDZ Evaluation Board demonstrates the ADHV4710 housed in a compact 12mm x 12mm, 80-lead TQFP package. It is designed for demanding applications such as piezo drivers and programmable power supplies, featuring robust thermal management and galvanic isolation for LVDS interface. This board provides a platform for quick evaluation of the ADHV4710 in various user-defined configurations.
Manufacturer
Part #
Category
Fastron 1616FP PowerDescription
Fastron 1616FP Power Inductors are wire-wound unshielded chip size inductors with pre-tinned terminals. They offer up to 100μH inductance and a maximum DCR of 2350mΩ, with a rated current of 2.80A. These inductors are ideal for applications in AC-DC converters, DC-DC converters, and LED lighting.
Manufacturer
Part #
Category
Texas Instruments LP5816 PowerDescription
The Texas Instruments LP5816 4-Channel I2C Interface RGBW LED Driver features an ultra-low operation current of 0.1µA in shutdown mode and supports analog and PWM dimming methods for optimal performance. Each LED's output current can be finely adjusted in 256 steps, providing precise control over brightness. This driver is ideal for applications in personal electronics and smart devices.
Manufacturer
Part #
Category
Texas Instruments LP5817 PowerDescription
The Texas Instruments LP5817 3-Channel RGB LED Driver has an ultra-low operation current of 0.1µA in shutdown mode and utilizes analog and PWM dimming methods for performance. Each LED's output current can be adjusted in 256 steps, providing precise control over brightness. It features a 400kHz I2C interface and operates within a temperature range of -40°C to 125°C.
