Latest Components
Manufacturer
Part #
Category
ROHM Semiconductor SCT2H12NWB PowerDescription
The ROHM Semiconductor SCT2H12NWB is a 1700V N-Channel SiC Power MOSFET with a continuous drain current rating of 3.9A. It features a low on-state resistance of 1.15mΩ and is designed for fast switching applications. This device is ideal for auxiliary and switch-mode power supply applications.
Manufacturer
Part #
Category
Texas Instruments LP8865C-Q1 PowerDescription
Texas Instruments LP8865C-Q1 Multi-Topology LED Drivers are low-cost, non-synchronous multi-topology solutions with a wide input range of 4.5V to 65V. These drivers integrate a low-side NMOS switch to efficiently drive LEDs with high power density. The family supports PWM and analog dimming, making it versatile for various automotive applications.
Manufacturer
Part #
Category
Orion Fans OA109Y PowerDescription
Orion Fans OA109Y Series Plastic Frame 120mm AC Fans feature 115V and 230V rated voltage, 110CFM maximum airflow, and 0.37 maximum static pressure. These fans are designed with an impedance-protected AC shaded pole motor and a dual ball bearing system, ensuring high performance and reliability. Typical applications include appliances, food equipment, and telecom systems.
Manufacturer
Part #
Category
CUI Inc DQD6 PowerDescription
CUI Inc DQD6 DC-DC Converters offer up to 6W isolated output, 1500VDC isolation, and a temperature range of -40°C to +85°C. These converters feature single- and dual-regulated outputs, remote on/off control, and various mounting options. They are ideal for ITE, commercial, and industrial applications.
Manufacturer
Part #
Category
CUI Inc DQD20 PowerDescription
CUI Inc DQD20 DC-DC Converters offer up to 20W isolated output, 1500VDC isolation, and an operating temperature range of -40°C to +85°C. These converters include various protections such as overvoltage and short circuit, along with remote on/off control. They are certified to IEC/EN 62368-1 standards, making them suitable for ITE, commercial, and industrial applications.
Manufacturer
Part #
Category
TDK EV160xA PowerDescription
TDK EV160xA μPOL Evaluation Boards are compact, high-efficiency evaluation platforms designed to demonstrate the performance of TDK’s μPOL DC-DC converters. These boards combine a high-frequency inductor and power IC into a single, low-profile module, enabling high power density and thermal performance. Ideal for powering FPGAs, ASICs, and other high-performance digital ICs.
Manufacturer
Part #
Category
Vishay Semiconductors VORA1150 PowerDescription
The Vishay Semiconductors VORA1150 Solid State Relay is an AEC-Q102 qualified 1 form A solid-state relay in a 4-pin SMD-8 package. It features 1500V load voltage, 50mA load current, and 100Ω typical on-resistance, providing reinforced isolation and RoHS compliance. Typical applications include battery isolation measurement in electric vehicles and solar panel leakage current detection.
Manufacturer
Part #
Category
Trenz Electronic TE0713-03-82C46-A PowerDescription
The Trenz Electronic TE0713-03-82C46-A FPGA Module features an AMD Artix™ 7A200T-2C, USB 3.0 to FIFO bridge, and 1GB DDR3L SDRAM. It offers numerous configurable I/O's via rugged high-speed strips and comes with an onboard high-efficiency DC-DC converter. This module is designed for flexibility and compatibility in various applications.
Manufacturer
Part #
Category
Orion Fans ODC10025 PowerDescription
Orion Fans ODC10025 Compact DC Centrifugal Blowers are small motorized impellers that include a pulse width modulation (PWM) speed control input and an open collector tachometer output. The series features 12V, 24V, or 48V rated voltage options, a 5950RPM rated speed, and 65.0CFM maximum airflow. They are suited for a variety of applications, including refrigeration, agriculture, medical, and kiosks/digital signage.
Manufacturer
Part #
Category
Lantronix Open-Q AL Development Kits PowerDescription
The Lantronix Open-Q AL Development Kits are designed for rapid prototyping of products requiring advanced imaging and computer vision in low-cost, low-power environments. They include separate hardware modules connected by high- and low-speed connectors and comply with the 96Boards open hardware specification. This allows for the addition of third-party mezzanine expansion boards.
