Latest Components
Manufacturer
Part #
Category
Schurter DG11 PowerDescription
Schurter DG11 Power Entry Modules include a thermo-magnetic circuit breaker type TA35 according to the IEC 60934 standard. These modules are designed to avoid potential damage to equipment caused by increased short-circuit protection. Typical applications include data centers, medical electronics, and industrial automation.
Manufacturer
Part #
Category
Abracon AMELH4025S PowerDescription
Abracon AMELH4025S Power Inductors are flat wire/hot-press molded power inductors with inductance ranging from 0.13μH to 4.7μH. These inductors feature low DCR, high saturation current, and ultra-low AC losses, making them suitable for various applications. They provide improved efficiency and thermal performance, supporting higher load currents and superior EMI suppression.
Manufacturer
Part #
Category
Renesas Electronics FPB-RA2T1 PowerDescription
The Renesas Electronics FPB-RA2T1 Fast Prototyping Board is a versatile development platform built around the RA2T1 32-bit Arm Cortex-M23 microcontroller. It features a built-in E2 emulator Lite for seamless programming and debugging, along with Arduino Uno and Pmod interfaces for broad expandability. This board is ideal for rapid evaluation and embedded system development.
Manufacturer
Part #
Category
ROHM Semiconductor RxL120BLFRA PowerDescription
ROHM Semiconductor RxL120BLFRA Power MOSFETs are automotive-grade MOSFETs that are AEC-Q101 qualified. They feature a 60V drain source breakdown voltage and 30mΩ static drain source on-state resistance, making them suitable for various automotive applications. Ideal for ADAS, infotainment, lighting, and body systems.
Manufacturer
Part #
Category
ROHM Semiconductor RxP120BLFRA PowerDescription
ROHM Semiconductor RxP120BLFRA Power MOSFETs are automotive-grade MOSFETs that are AEC-Q101 qualified. The devices supply 100V drain-source breakdown voltage, 62mΩ static drain-source on-state resistance, and ±12A continuous drain current. They are ideal for automotive applications, including ADAS, infotainment, lighting, and body.
Manufacturer
Part #
Category
ROHM Semiconductor BD9xND-C PowerDescription
ROHM Semiconductor Nano Cap BD9xND-C LDO Regulators utilize Nano Cap™ topology, designed for low-current-consumption in automotive applications. They support output currents up to 500mA with a low quiescent current of 25μA and provide high output voltage accuracy of ±2.0%. The regulators feature integrated overcurrent protection and thermal shutdown for enhanced reliability.
Manufacturer
Part #
Category
Infineon Technologies FF06MR12A04MA2 PowerDescription
Infineon Technologies HybridPACK™ DSC S Modules with SiC MOSFET and NTC are high-performance power modules designed for demanding automotive applications, particularly in hybrid and electric vehicles (xEVs). This compact half-bridge module integrates silicon carbide (SiC) MOSFETs and an NTC thermistor, enabling superior efficiency and thermal performance. With a blocking voltage of 1200V and a nominal current rating of 190A, the modules support high-speed switching with low conduction and switching losses.
Manufacturer
Part #
Category
Infineon Technologies CoolSET SiP Reference Design Boards PowerDescription
Infineon Technologies CoolSET™ SiP Reference Design Boards are compact, high-efficiency power supply solutions that integrate Infineon’s advanced CoolSET ICE184 and ICE186 series. These boards are designed for offline switch-mode power supplies in applications such as home appliances and industrial control. Utilizing a quasi-resonant flyback topology with zero-voltage switching, they achieve high efficiency and low EMI performance.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EV183 PowerDescription
Monolithic Power Systems (MPS) EV183 Evaluation Boards are designed to demonstrate the capabilities of the MP183, a primary-side constant voltage (CV) regulator that provides accurate CV regulation without an optocoupler. These boards support buck, buck-boost, boost, and flyback topologies. The MP183 is ideal for IoT power supplies and features low standby power consumption.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) MP24881 PowerDescription
The MP24881 is a 60V, monolithic, synchronous step-down LED driver that delivers up to 1.1A of continuous LED current to high-power LEDs. It features a wide input voltage range of 10V to 60V and supports both PWM and analog dimming. With built-in protections and excellent dimming performance, it is ideal for various lighting applications.
