Latest Components
Manufacturer
Part #
Category
MEAN WELL LRS-1200 PowerDescription
MEAN WELL LRS-1200 Enclosed Type Power Supplies offer a 1200W power rating, a low-profile design, and 3G anti-vibration capability. These single-output, enclosed power supplies feature an input range of 180VAC to 305VAC and provide output voltage options of 12V, 24V, 36V, and 48V. Suitable applications include industrial automation machinery and electronic instruments.
Manufacturer
Part #
Category
onsemi NCV78703 PowerDescription
onsemi NCV78703 LED Driver ICs are single-chip and highly efficient boosters for smart power ballast and LED drivers. These driver ICs are designed for automotive front lighting applications and can drive multiple LED strings of up to 60V. They include a current-mode voltage boost controller that minimizes the need for external components.
Manufacturer
Part #
Category
Texas Instruments TPS1212-Q1 PowerDescription
Texas Instruments TPS1212-Q1 Automotive High-Side Switch Controllers are designed for automotive applications with a wide operating voltage range of 3.5V to 73V. These controllers feature integrated gate drives and accurate current sensing with overcurrent protection. They are AEC-Q100 qualified, making them suitable for various automotive system designs.
Manufacturer
Part #
Category
Texas Instruments TPS61372L PowerDescription
The Texas Instruments TPS61372L Synchronous Boost Converter is a fully integrated converter with a built-in load disconnect. It features a 1.5MHz switching frequency, up to 16V output voltage, and a 2.5V to 5.5V input voltage range. This converter is ideal for applications such as RF PA drivers, NAND flash, and motor drivers.
Manufacturer
Part #
Category
Innodisk AXMB-D150-A00 PowerDescription
The Innodisk AXMB-D150-A00 Motherboard is integrated with an Intel® core ultra 7 processor 265H and features a Mini-ITX form factor. It delivers 97TOPS for edge AI computing with a maximum frequency of 5.3GHz and supports up to 64GB of DDR5 memory. This motherboard operates within a temperature range of 0°C to 60°C and requires a 12V DC power input.
Manufacturer
Part #
Category
Texas Instruments DRV8376-Q1 PowerDescription
Texas Instruments DRV8376-Q1 3-Phase Integrated FET Motor Drivers provide a gate drive and power stage for driving 4.5V to 65V brushless-DC motors. These drivers feature three 1/2-H bridges with a maximum capability of 70V and a low RDS(ON) of 400mΩ. They are AEC-Q100 qualified for automotive applications and support various motor control techniques.
Manufacturer
Part #
Category
Weidmuller CUBESERIES PowerDescription
Weidmuller CUBESERIES Industrial Relay Modules feature PUSH IN and screw connection options for quick installation. These modules are designed to reliably switch small loads and decouple systems, making them ideal for industrial automation applications. With various relay contact versions available, they offer flexibility and durability.
Manufacturer
Part #
Category
Silvertel EvalAg6810 PowerDescription
Silvertel EvalAg6810 Evaluation Board is designed to evaluate and demonstrate the Ag6810 Power Sourcing Equipment (PSE) module. This board helps to pass through 10/100/1000BASE-T Ethernet data signals from a source onto any powered device connected to the output ports. It is powered using a DC power supply with an output between 52V and 57V.
Manufacturer
Part #
Category
Vishay / Dale IHXL2000VZ-3A PowerDescription
Vishay / Dale IHXL2000VZ-3A Automotive Through-Hole Inductors are AEC-Q200 qualified and feature a high-temperature rating of up to +155°C. These inductors handle high transient current spikes without saturation and are suitable for applications like automotive high-current battery charging and brushless DC motors. The improved core material offers a 20% reduction in core loss compared to previous models.
Manufacturer
Part #
Category
Vishay / Dale IHXL1500VZ-3A PowerDescription
Vishay / Dale IHXL1500VZ-3A Automotive Through-Hole Inductors are AEC-Q200 qualified and feature a high-temperature rating of up to +155°C. These inductors provide excellent magnetic shielding and high thermal conductivity, making them suitable for high-current applications. They handle high transient current spikes without saturation, ideal for automotive battery charging and brushless DC motors.
