Latest Components
Manufacturer
Part #
Category
PolyPhaser 164758325 PowerDescription
PolyPhaser 400MHz to 2.5GHz RF Coaxial Surge Protectors protect equipment from Electro-Magnetic Pulses (EMP) or power surges caused by lightning or other electrical disturbances. These surge protectors feature 600W maximum power handling and are ideal for radio and antenna installations. Designed to pass frequencies ranging from 400MHz to 2.5GHz while suppressing DC surges, they are perfect for WiFi, GPS, and land mobile radios.
Manufacturer
Part #
Category
PolyPhaser 135383678 PowerDescription
PolyPhaser 2GHz to 6GHz N-Type Bulkhead RF Surge Protectors protect equipment from Electro-Magnetic Pulses (EMP) or power surges caused by lightning or other strong electrical disturbances. These surge protectors feature a 10kA surge current and a waterproof IP67 rating, making them ideal for outdoor installations. They are designed to pass 2GHz to 6GHz while suppressing DC surges.
Manufacturer
Part #
Category
PolyPhaser TSX HT PowerDescription
PolyPhaser TSX HT RF EMP Surge Protectors are HEMP tested to protect a wide range of 2.7GHz WiFi and cellular power configurations. These surge protectors utilize a patented high-pass filter design that enables extremely low let-through voltage even at high surge current levels. They feature a bidirectional broadband filter and are ideal for protecting critical systems.
Manufacturer
Part #
Category
M5Stack CC1101 PowerDescription
The M5Stack CC1101 Wireless Communication Module adopts the E07-900M10S module solution with an operating frequency range of 855MHz to 925MHz. It supports various modulation methods, providing stable wireless data transmission while maintaining low power consumption. This module is ideal for applications in industrial automation, smart home systems, and robotics.
Manufacturer
Part #
Category
Nexperia NPS7601 PowerDescription
The Nexperia NPS7601 is a regulated forward-drop load switch with true reverse-current blocking capabilities. It operates across an input voltage range of 1.5V to 5.5V and supports up to 1.5A of continuous current, providing efficient switching between power rails. This device is ideal for applications in consumer electronics, wearables, and IoT devices.
Manufacturer
Part #
Category
Chip Quik SMD2088-6000 PowerDescription
Chip Quik SMD2088-6000 BGA Solder Spheres are large-sized lead-free spheres designed for larger soldering projects. With a diameter of 1.1mm and 6000 spheres per bottle, they are made from a Sn96.5/Ag3.0/Cu0.5 alloy and have a melting point of +217°C to +220°C. These spheres meet or exceed IPC and MIL standards for purity and size tolerances.
Manufacturer
Part #
Category
Infineon Technologies BTS50010-1LUA PowerDescription
The Infineon Technologies Power PROFET™ + Capacitive Load Charging Evaluation Board is designed to demonstrate safe and efficient switching of capacitive loads in various voltage systems. It serves as a practical reference design for high-side switches in applications like power distribution and heating systems. The board includes features to manage high inrush currents and provides simulation results for adapting designs to specific capacitor sizes.
Manufacturer
Part #
Category
Vishay ISO-DC-VSAO PowerDescription
Vishay ISO-DC-VSAO Isolated DC Voltage Reference Design is based on the VIA2000SD isolation amplifier and a CDHV voltage divider, ideal for high DC-voltage applications requiring isolated sensing circuits. It scales high input voltage down to +2000mV, producing an isolated, amplified analog signal. This design is suitable for power supplies, battery monitoring systems, EV powertrains, and motor control applications.
Manufacturer
Part #
Category
Infineon Technologies CYW9RPI55513-EVK PowerDescription
The Infineon Technologies AIROC™ Wi-Fi® and BLUETOOTH® Evaluation Kit is designed for developers to evaluate and prototype IoT and audio applications. Built around the Raspberry Pi Compute Module 4 Lite, it supports various interfaces and includes the Ezurio Sona™ IF513 M.2 module with advanced Wi-Fi and Bluetooth capabilities. This kit simplifies the development process with a familiar Linux environment and robust connectivity options.
Manufacturer
Part #
Category
DFRobot DFR0886 PowerDescription
The DFRobot DFR0886 Edge101 is an industrial-grade ESP32 IoT programmable controller designed for real-world deployment. It features essential communication interfaces such as isolated RS485, CAN bus, Ethernet, Wi-Fi, and Bluetooth, making it ideal for automation and monitoring applications. With robust protections and flexible connectivity options, it is well-suited for various industrial applications.
