Latest Components
Manufacturer
Part #
Category
TDK Corporation B25648A PowerDescription
The ModCap UHP series of DC link capacitors by TDK enables continuous operation at temperatures up to +105 °C without derating, setting a new standard for power electronic applications. With a voltage rating of 1350V to 1800V and a capacitance range of 470µF to 880µF, these capacitors are optimized for high-frequency performance in SiC semiconductor-based inverters. Their modular design and high current density make them ideal for renewable energy and industrial motor drive applications.
Manufacturer
Part #
Category
TDK B25648 PowerDescription
TDK's ModCap UHP series features a new high-temperature dielectric film designed for high-power DC-link applications. It operates reliably at temperatures up to +105 °C and offers up to 21% higher current density compared to conventional capacitors. This makes it ideal for demanding applications in renewable energy, electric vehicles, and industrial drives.
Manufacturer
Part #
Category
STMicroelectronics EVLG599-250WLLC PowerDescription
The STMicroelectronics EVLG599-250WLLC Demonstration Board is a resonant LLC converter designed for industrial applications, offering compact size and high efficiency. It supports up to 250W output power at 24VDC and features integrated protection against overcurrent and short-circuit conditions. This board is ideal for DC-DC conversion and can be utilized in various applications, including adapters and consumer switch mode power supplies.
Manufacturer
Part #
Category
Nisshinbo NB7120ZA PowerDescription
The Nisshinbo NB7120ZA is a Li-ion/Li-polymer rechargeable battery protection device that offers high accuracy overcharge/discharge, overcurrent, and temperature protections. It includes a short circuit protector and can detect temperature via a thermistor. This IC is ideal for applications in hearable/wearable devices, smartphones, and handheld data terminals.
Manufacturer
Part #
Category
Bourns SA2-HS PowerDescription
Bourns SA2-HS High-Voltage Gas Discharge Tubes (GDT) are designed for power applications that require fast and reliable surge protection. These tubes deliver a DC breakdown voltage of 3.1kV and an impulse sparkover of 3.7kV at 1kV/µs. Ideal for high voltage power, industrial, and energy conversion systems, they provide improved protection for downstream circuitry.
Manufacturer
Part #
Category
TDK FS3303 PowerDescription
The TDK FS3303 µPOL™ Buck Regulator is a fully integrated and highly efficient micro-Point-of-Load voltage regulator. It features an on-chip PWM controller and integrated MOSFETs, making it an ultra-compact 3A synchronous buck regulator suitable for various applications. With a wide input voltage range and built-in protection features, it is ideal for optical networking systems, FPGAs, and portable devices.
Manufacturer
Part #
Category
CUI Inc P78B-1000R PowerDescription
CUI Inc P78B-1000R 1A Non-Isolated DC-DC Converters deliver high-efficiency DC-DC conversion (up to 94.5%) in a compact SIP3 package. It features a wide 4.75V to 36V input voltage range and continuous short-circuit protection. Ideal for computers, industrial controls, and electric vehicle charging stations.
Manufacturer
Part #
Category
Texas Instruments AMC0100R PowerDescription
The Texas Instruments AMC0100R is a precision, galvanically isolated amplifier designed for a ±250mV differential input with a single-ended, ratiometric output. It is optimized for direct connection to low-impedance signal sources and features an isolation barrier that supports high working voltages. This amplifier is suitable for applications in motor drives and power supplies.
Manufacturer
Part #
Category
STMicroelectronics STDRIVEG612 PowerDescription
The STMicroelectronics STDRIVEG612 600V High-Speed Half-Bridge Gate Driver is optimized for 5V driving enhanced-mode GaN HEMTs. It supports a voltage rail of up to 600V and features high-current capability with short propagation delays. This driver is ideal for applications such as AC-DC converters, battery chargers, and motor drivers.
Manufacturer
Part #
Category
NXP Semiconductors FRDM-MCXW72 PowerDescription
The NXP Semiconductors FRDM-MCXW72 MCU Development Board is a compact and scalable development board designed for rapid prototyping of the MCX W72 wireless MCU. It supports multiprotocol wireless communication including Bluetooth LE, Zigbee, Thread, and Matter. The board features an onboard MCU-Link debugger, various sensors, and external SPI Flash memory for enhanced functionality.
