Latest Components
Manufacturer
Part #
Category
Abracon AMELH4030S PowerDescription
Abracon AMELH4030S Power Inductors are flat-wire / hot-press molded power inductors with inductance ranging from 0.13μH to 8.2μH. These inductors feature low DCR, high saturation current, and ultra-low AC losses, making them suitable for various applications. They provide improved efficiency and thermal performance, ideal for consumer electronics, industrial electronics, and telecom equipment.
Manufacturer
Part #
Category
Abracon AMELH4025S PowerDescription
Abracon AMELH4025S Power Inductors feature inductance ranging from 0.13μH to 4.7μH, minimal audible buzzing, and low DCR. These flat-wire / hot-press molded power inductors offer high saturation current, soft saturation characteristics, and ultra-low AC losses. The series is designed for improved efficiency and thermal performance, supporting higher load currents with superior EMI suppression.
Manufacturer
Part #
Category
ADLINK Technology EMP-520 PowerDescription
The ADLINK Technology EMP-520 Advanced Embedded Box PC supports EDID emulation across four independent HDMI 2.0 displays, ensuring accurate refresh rate detection and resolution. It features a maximum resolution of 3840 x 2160 at 60Hz, making it ideal for industrial applications. With robust IoT connectivity and a compact design, it is built for reliability in demanding environments.
Manufacturer
Part #
Category
Phoenix Contact CHARX EVC-100 PowerDescription
Phoenix Contact CHARX EVC-100 Vehicle Charging Controllers are designed to manage the DC charging process in electric trucks, buses, and other electrified commercial vehicles. This controller acts as the brain of an electric vehicle's charging system, communicating with the charging station via CAN bus protocol. It is optimized for compatibility with CCS and NACS charging systems.
Manufacturer
Part #
Category
CEL CMP4612 PowerDescription
The CEL CMP4612 Evaluation Board is designed to evaluate the CMP4612 Wi-Fi® 6 + BLUETOOTH® LE 5.4 + 802.15.4 for IoT module. It features an Arm® Cortex®-M33 MCU, up to 16MB flash, and various interfaces including USB and Ethernet. This board is ideal for multi-protocol applications such as connected homes, security, and smart energy.
Manufacturer
Part #
Category
Infineon Technologies OPTIGA TPM SLB 9673 PowerDescription
The Infineon Technologies OPTIGA™ TPM SLB 9673 Raspberry Pi Evaluation Board provides a quick and easy way for developers to get started with the OPTIGA Trusted Platform Module (TPM) SLB 9673 for Raspberry Pi. This evaluation board conforms to the Raspberry Pi HAT specification and supports both 3V and 1.8V power supplies. It facilitates secure communication and device authentication for IoT applications.
Manufacturer
Part #
Category
MaxLinear MxL7650x PowerDescription
MaxLinear MxL7650x 18V Synchronous Step-Down Converters are fully integrated, high-efficiency converters that require a minimum number of external components. They offer a compact solution with up to 2A, 3A, and 8A continuous output current over a wide input range, operating at a 0.6V to 18V output voltage range. These converters utilize a proprietary Constant-on-Time (COT) control scheme for superior transient response.
Manufacturer
Part #
Category
MaxLinear MxL7650x PowerDescription
MaxLinear MxL7650x Evaluation Kits offer a platform to evaluate the features and performance of the MxL7650x synchronous step-down Constant-on-Time (COT) buck converters. These converters operate at a wide input voltage range of up to 18V with continuous output current ratings of 2A, 3A, and 8A. Protection features include Under-Voltage Lockout (UVLO), Over-Current Protection (OCP), thermal shutdown, and short-circuit protection with hiccup mode.
Manufacturer
Part #
Category
STMicroelectronics L99VR03 PowerDescription
STMicroelectronics L99VR03 Linear Voltage Regulators are designed for standby microprocessor control-unit systems, especially in automotive applications. This LDO provides up to 300mA of load current with low quiescent current consumption. It features an input voltage range of up to 40V and is available in output voltage options of 3.3V or 5V.
Manufacturer
Part #
Category
Phoenix Contact MINI Analog Pro Ex PowerDescription
Phoenix Contact MINI Analog Pro Ex Signal Conditioning Modules are mini-style 6.2mm analog signal conditioners designed for functional safety up to SIL 3. They provide isolation, conversion, filtering, and amplification, suitable for hazardous areas. The modules ensure explosion protection and operate effectively in extreme conditions.
