Latest Components
Manufacturer
Part #
Category
CUI Inc VGSM-150E & VOFM-150E PowerDescription
CUI Inc VGSM-150E and VOFM-150E Medical Power Supplies are a medically certified family of open-frame AC-DC power supplies ideal for medical applications. These power supplies feature 150W output power and a wide input voltage range of 90VAC to 264VAC. They are compact in size, energy-efficient, and equipped with essential protection features.
Manufacturer
Part #
Category
ROHM Semiconductor BM3G115MUV-EVK-003 PowerDescription
The ROHM Semiconductor BM3G115MUV-EVK-003 Evaluation Board is designed to evaluate and demonstrate the capabilities of the BM3G115MUV GaN HEMT power stage IC. It features an integrated driver and protection circuit, allowing it to replace traditional discrete power switches. This evaluation board operates within the -40°C to 105°C temperature range.
Manufacturer
Part #
Category
IXYS IXSJxN120R1K PowerDescription
The IXYS IXSJxN120R1K 1200V SiC Power MOSFETs feature up to 1200V blocking voltage with low RDS(on) values of 18mΩ or 36mΩ. These MOSFETs offer low gate charge and input capacitance, making them suitable for various applications including EV charging and solar inverters. They provide a flexible gate voltage range and are designed for high-performance power conversion.
Manufacturer
Part #
Category
STMicroelectronics STDRIVEG210 PowerDescription
STMicroelectronics STDRIVEG210 Half-Bridge Gate Drivers are designed for N-channel enhancement mode GaN, with a high-side driver section that withstands up to 220V. They feature high current capability, short propagation delay, and integrated LDOs, making them ideal for high-speed GaN applications. These drivers are optimized for various applications including DC/DC, AC/DC, and LED lighting.
Manufacturer
Part #
Category
Texas Instruments TCAN284x-Q1 PowerDescription
The Texas Instruments TCAN284x-Q1 CAN FD System Basis Chips provide a flexible data rate capable transceiver that supports selective wake. It includes a LIN transceiver and features multiple regulators for power management. This device is AEC-Q100 qualified for automotive applications and offers advanced diagnostics and protection features.
Manufacturer
Part #
Category
Texas Instruments TPD4S201-Q1 PowerDescription
The Texas Instruments TPD4S201-Q1 USB Type-C® Port Protector IC is a single-chip solution that provides IEC ESD and 28V short-to-VBUS overvoltage protection. It ensures that the CC and SBU pins are 28V tolerant, safeguarding against potential shorts caused by mechanical stress or environmental factors. This device is ideal for automotive applications requiring robust protection for USB Type-C connectors.
Manufacturer
Part #
Category
Renesas Electronics EK-RA2L2 PowerDescription
The Renesas Electronics EK-RA2L2 Evaluation Kit provides an entry point for evaluation, prototyping, and development with the RA2L2 MCU. It incorporates an emulator circuit that can be used without any hardware tools and includes breakout pin headers for easy access to all MCU signals. This kit is ideal for applications such as USB data loggers and EV chargers.
Manufacturer
Part #
Category
Texas Instruments TCAN245x-Q1 PowerDescription
The Texas Instruments TCAN245x-Q1 is a Signal Improvement Capable (SIC) CAN FD System Basis Chip (SBC) that supports data rates up to 8Mbps. It integrates a buck regulator that can output either 3.3V or 5V with a maximum output current of 1A, along with a 5V LDO for additional loads. This device is AEC-Q100 qualified for automotive applications and includes features for selective wakeup and fault diagnostics.
Manufacturer
Part #
Category
Texas Instruments TPD4S48x-Q1 PowerDescription
Texas Instruments TPD4S48x-Q1 USB Type-C® Port Protector ICs are single-chip USB Type-C port protection ICs that provide IEC ESD and 48V short-to-VBUS overvoltage protection. They enable the CC and SBU or USB2 pins to be 48V tolerant without interfering with normal operation by providing over-voltage protection. The device integrates IEC 61000-4-2 ESD protection for external pins, eliminating the need for additional high-voltage TVS diodes.
Manufacturer
Part #
Category
Microchip Technology dsPIC33AK512MPS512 PowerDescription
The Microchip Technology dsPIC33AK512MPS512 General Purpose Dual In-Line Module (DIM) is designed to demonstrate the capabilities of the dsPIC33AK512MPS512 Digital Signal Controllers using the dsPIC33A Curiosity Platform Development Board. It features a keyed design with reduced socketing insertion force for correct board orientation.
