Latest Components
Manufacturer
Part #
Category
IXYS Integrated Circuits CPC1343G SemiconductorsDescription
IXYS Integrated Circuits CPC1343G OptoMOS® Solid State Relays utilize discrete semiconductor components for fast, reliable, and bounce-free switching. With a 60V blocking voltage and a continuous load current of up to 900mA, these relays ensure efficient power handling. They feature 5000V RMS isolation for enhanced safety in sensitive applications.
Manufacturer
Part #
Category
Diotec Semiconductor LDP02-26CAYD2-AQ SemiconductorsDescription
Diotec Semiconductor LDP02-26CAYD2-AQ SMD TVS Diode offers 6600 W peak power, fast response, and ISO-16750-2 load-dump test compliance. This diode is designed for over-voltage protection and load-dump protection in motor vehicle supply systems. It features a 22V stand-off voltage and a breakdown voltage range of 24.4V to 28V.
Manufacturer
Part #
Category
ROHM Semiconductor LMRx802-LB SemiconductorsDescription
The ROHM Semiconductor LMRx802-LB Operational Amplifier features low-noise, low-input offset voltage, and low input bias current. It is a high-precision single or dual-CMOS operational amplifier ideal for industrial applications. This op amp is suitable for battery-powered equipment and sensors.
Manufacturer
Part #
Category
IXYS Integrated Circuits CPC1601M SemiconductorsDescription
The IXYS CPC1601M 1-Form-A Solid State Latching Relay is a low operating current relay in a compact 3mm x 3mm 8-pin DFN package. It can operate using power from an open-circuit load or a system power supply, allowing for extended battery life. This relay features a power output pin that can supply up to 10mW to external circuits.
Manufacturer
Part #
Category
Texas Instruments SN74AHCT374-Q1 SemiconductorsDescription
Texas Instruments SN74AHCT374/SN74AHCT374-Q1 Octal D-Type Flip-Flops include 3-state outputs and eight D-type flip-flops. These flip-flops operate at a 4.5V to 5.5V supply voltage range, with low delay and support 130MHz at 5V. Ideal for parallel data synchronization and storage, this device is AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
onsemi NVD6824NL SemiconductorsDescription
onsemi NVD6824NL Single N-Channel MOSFETs offer low RDS(on) to minimize conduction losses and high current capability. These MOSFETs feature a 100V drain-to-source voltage and a continuous drain current of 41A, making them suitable for automotive applications. They are AEC-Q101 qualified, RoHS-compliant, and designed for solenoid drivers and boost switches.
Manufacturer
Part #
Category
Texas Instruments SN74LV8T273/SN74LV8T273-Q1 SemiconductorsDescription
Texas Instruments SN74LV8T273/SN74LV8T273-Q1 Octal D-Type Flip-Flops include eight positive-edge-triggered D-type flip-flops with a direct active low Clear (CLR) input. These devices operate at a wide range of 1.65V to 5.5V supply voltage and are AEC-Q100 qualified for automotive applications. Ideal for synchronizing digital signals to a clock, they support up to 150Mbps with 5V or 3.3V VCC.
Manufacturer
Part #
Category
Diodes Incorporated PI6CB332202/PI6CB332204 SemiconductorsDescription
Diodes Inc. PI6CB332202/PI6CB332204 2-Input Clock Mux is a low-power device for PCIe 5.0/6.0 applications. It supports two reference inputs to fanout two/four low-power differential HCSL outputs up to 400MHz, with on-chip terminations for 85Ω or 100Ω output impedance. The device features power management capabilities and supports automatic output clock locking upon loss of input clock.
Manufacturer
Part #
Category
Texas Instruments SN74AHC373 & SN74AHC373-Q1 SemiconductorsDescription
Texas Instruments SN74AHC373 and SN74AHC373-Q1 Octal D-Type Latches are high-speed CMOS logic devices designed for octal transparent D-type latches with 3-state outputs. They operate within a supply voltage range of 2V to 5.5V and support high performance in digital systems. These devices are AEC-Q100 qualified for automotive applications and are available in a wettable flank QFN package.
Manufacturer
Part #
Category
Texas Instruments SN74LV8T374-Q1 SemiconductorsDescription
The Texas Instruments SN74LV8T374-Q1 consists of eight D-type flip-flops with 3-state outputs and integrated-level translation. It operates over a wide supply voltage range of 1.65V to 5.5V and is AEC-Q100 qualified for automotive applications. Typical applications include parallel data synchronization, storage, and shift registers.
