Latest Components
Manufacturer
Part #
Category
Texas Instruments TPUL2T223/-Q1 SemiconductorsDescription
The TPUL2T223/-Q1 devices are dual, RC-configurable non-retriggerable monostable multivibrators designed for 1.5V to 5.5V operation. They feature three trigger inputs with Schmitt-trigger architecture for noise immunity and support TTL-compatible operation. These devices are ideal for generating fixed-width digital pulses, detecting signal edges, and debouncing switches, and are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments TPUL2T323/-Q1 SemiconductorsDescription
The TPUL2T323/-Q1 integrates two independent, extended-pulse-width, RC-configurable retriggerable monostable multivibrators for 1.5V to 5.5V operation. It features Schmitt-trigger inputs for noise immunity and supports pulse timing configured with external resistor and capacitor values. This device is designed for applications such as digital signal demodulation, system reset timing, pulse generation, and switch debouncing, and is AEC-Q100 qualified for automotive use.
Manufacturer
Part #
Category
Infineon Technologies PROFET+ 48V SemiconductorsDescription
Infineon Technologies PROFET™ + 48V Automotive Smart High-Side Switches are designed for use in 48V board nets with comprehensive protection functions, current sense diagnosis, and high short-circuit robustness. These switches support 1 to 4 channels and drive loads from 1A to 5A nominal current with an extended operating voltage range up to 60V. They are AEC-Q100 automotive qualified, ISO 26262-ready, and suitable for resistive, inductive, and capacitive loads, replacing electromechanical relays, fuses, and discrete circuits.
Manufacturer
Part #
Category
Texas Instruments SN74LVC240A/-Q1 SemiconductorsDescription
The SN74LVC240A/-Q1 is an 8-bit buffer/driver with 3-state outputs designed for signal buffering and driving applications. It operates from 1.65V to 3.6V with 5.5V overvoltage-tolerant inputs and features partial-power-down protection and strong push-pull output drive. This device is AEC-Q100 qualified for automotive applications and supports operation over a -40°C to +125°C temperature range.
Manufacturer
Part #
Category
STMicroelectronics L98GD8E SemiconductorsDescription
The STMicroelectronics L98GD8E is an 8-channel MOSFET pre-driver configurable for low-side, high-side, peak and hold, and H-bridge load control. It supports 12V, 24V, and 48V vehicle battery systems and offers comprehensive diagnostic features and safety functions. The device is designed for automotive applications, providing PWM control and protection against short circuits and overcurrent.
Manufacturer
Part #
Category
Mikroe BLDC FOC Click SemiconductorsDescription
The Mikroe BLDC FOC Click features the Texas Instruments MCF8329A sensorless Field Oriented Control (FOC) three-phase BLDC gate driver for code-free control of three-phase BLDC and PMSM motors. It integrates three half-bridge gate drivers and supports a 5V to 30V input supply range with internal charge pump and bootstrap circuit for 100% duty-cycle operation. This module is ideal for applications such as cordless vacuum cleaners, appliance fans, pumps, and power tools.
Manufacturer
Part #
Category
Mikroe LTE Cat.1 5 Click for Europe SemiconductorsDescription
The Mikroe LTE Cat.1 5 Click for Europe features the Sequans GC02S1-EU2 3GPP LTE Release 14 Cat 1 bis-compliant module for 4G LTE cellular connectivity in European IoT, M2M, and consumer applications. It supports LTE bands B1, B3, B8, B20, and B28 with data rates up to 10Mbps downlink and 5Mbps uplink. The module offers UART communication, firmware upgrade support, hardware flow control, and 1.8V uSIM card support.
Manufacturer
Part #
Category
Mikroe 110979693 SemiconductorsDescription
The Mikroe LTE Cat.1 5 Click for North America is based on the Sequans GC02S1-NA2 3GPP LTE Release 14 Cat 1 bis-compliant module, designed for 4G LTE cellular connectivity in North American IoT, M2M, and consumer applications. It supports multiple LTE bands and offers UART communication with hardware flow control, firmware upgrade support, and multiple interfaces including I2C, UART, and USB. The module is suitable for applications such as utility meters, industrial sensors, security systems, payment terminals, and smart home devices.
Manufacturer
Part #
Category
Mikroe DAC 24 Click SemiconductorsDescription
Mikroe DAC 24 Click is a compact add-on board for digital-to-analog conversion featuring gain control, offset adjustment, and programmable analog voltage output. It is based on the BD79701FVM-LB, a 3-channel, 8-bit R-2R DAC from ROHM Semiconductor, with a high-speed output response and a 3-wire SPI interface. Ideal for industrial equipment, battery-powered devices, and embedded systems requiring DAC functionality.
Manufacturer
Part #
Category
Mikroe RF Switch 2 Click SemiconductorsDescription
The Mikroe RF Switch 2 Click is a compact add-on board designed for high-frequency RF signal routing in wireless and signal-management applications. It features the PE42442 6GHz absorptive single-pole quadruple-throw (SP4T) RF switch with four symmetric RF ports and one common RFC port. The board offers high isolation up to 6GHz, an integrated CMOS decoder for simple control, and selectable 3.3V or 5V logic compatibility.
