Latest Components
Manufacturer
Part #
Category
Texas Instruments MUX708-Q1 SemiconductorsDescription
The MUX708-Q1 is a 44V, 8:1 single-channel analog multiplexer supporting bidirectional analog and digital signals. It features low leakage currents, latch-up immunity, and operates with single, dual, or asymmetric supplies. Designed for high-precision and automotive applications, it offers robust performance in harsh environments.
Manufacturer
Part #
Category
Texas Instruments TCAN241x-Q1 SemiconductorsDescription
The TCAN241x-Q1 is a CAN FD System Basis Chip integrating a CAN FD transceiver, a buck regulator, and an LDO regulator, supporting data rates up to 8Mbps. It features advanced wake-up, diagnostics, and protection functions, making it ideal for automotive and industrial applications. The device meets ISO 11898-2:2024 standards and includes EEPROM for configuration storage.
Manufacturer
Part #
Category
Texas Instruments AMC0x02R-Q1 SemiconductorsDescription
The AMC0x02R-Q1 is a precision, galvanically isolated amplifier with a ±50mV differential input and single-ended, ratiometric output. It features high common-mode transient immunity, low DC errors, and reinforced isolation up to 5kV RMS for automotive applications. Typical uses include traction inverters, onboard chargers, and DC/DC converters.
Manufacturer
Part #
Category
Texas Instruments AMC0x00R-Q1 SemiconductorsDescription
The AMC0x00R-Q1 is a precision, galvanically isolated amplifier designed for automotive applications. It features a ±250mV differential input, single-ended ratiometric output, and reinforced isolation up to 5kVRMS. Typical uses include traction inverters, onboard chargers, and DC/DC converters.
Manufacturer
Part #
Category
Texas Instruments BQ79735B-Q1 SemiconductorsDescription
The BQ79735B-Q1 is a voltage and isolation resistance monitor designed for high-voltage battery systems in electric and hybrid vehicles. It measures divided-down high-voltage nodes, monitors voltage across fuses and contactors, and checks isolation voltage in battery junction boxes. The device features 17 voltage channels, 15 GPIOs, and supports both capacitor and transformer-based isolation.
Manufacturer
Part #
Category
Qorvo QPL1825 SemiconductorsDescription
The Qorvo QPL1825 GaAs pHEMT CATV Amplifier is a highly linear differential RF amplifier designed for broadband CATV DOCSIS 4.0 systems. It features a cascode architecture that provides 25.5dB of gain with low distortion across a frequency range of 50MHz to 1.8GHz. This compact amplifier operates on an 8V supply and is suitable for various applications including nodes, line amplifiers, and cable modems.
Manufacturer
Part #
Category
Analog Devices Inc. ADRF6780 SemiconductorsDescription
The ADRF6780 Microwave Upconverters are based on Silicon Germanium (SiGe) and operate over a wideband frequency range of 5.9GHz to 23.6GHz. They offer two upconversion modes: direct conversion from baseband I/Q to RF and Single-Side-Band (SSB) upconversion from real Intermediate Frequency (IF). This compact upconverter is ideal for applications such as microwave radios, radar, and electronic warfare systems.
Manufacturer
Part #
Category
onsemi FAD1100-F085 SemiconductorsDescription
The onsemi FAD1100-F085 Ignition Gate Drive IC is designed to directly drive ignition IGBTs while managing coil current and spark events. It features a programmable input current and an internal spike filter for reliable operation. This device is ideal for automotive ignition systems requiring compact size and high performance.
Manufacturer
Part #
Category
Renesas Electronics RA0E3 SemiconductorsDescription
The Renesas Electronics RA0E3 General Purpose Microcontrollers are part of the entry-level, low-end RA0 series. They integrate an Arm Cortex-M23 core with low power and peripherals optimized for BOM cost reduction and a simple design. Ideal for applications requiring a low pin count, they support a wide operating voltage range and temperature range.
Manufacturer
Part #
Category
Texas Instruments TCAN1473A-Q1 SemiconductorsDescription
The TCAN1473A-Q1 is a signal-improvement-capable CAN FD transceiver with sleep mode, designed to meet ISO 11898-2:2024 requirements. It features a Sleep Wake Error timer for safe transitions to sleep mode and supports level-shifting I/O from 1.7V to 5.5V. This AEC-Q100 qualified IC is ideal for various automotive applications including body electronics and Advanced Driver Assistance Systems.
