Latest Components
Manufacturer
Part #
Category
Texas Instruments TLV904xD SemiconductorsDescription
Texas Instruments TLV904xD Operational Amplifiers are low-power, rail-to-rail input and output op-amps designed for high-gain, battery-powered applications. They operate from ultra-low 1.2V supplies to 5.5V rails, making them ideal for portable electronics and other applications. With a wide temperature range of -40°C to 125°C, these Op-Amps are suitable for various demanding environments.
Manufacturer
Part #
Category
Diotec Semiconductor SL1MR13 SemiconductorsDescription
The Diotec Semiconductor SL1MR13 Standard Recovery Rectifier features a 1000V repetitive peak reverse voltage and a maximum average forward rectified current of 1A at 50°C. It is designed for applications such as main rectification power supplies and polarity protection. This rectifier is AEC-Q101 compliant and comes in a compact SOD-123FL package.
Manufacturer
Part #
Category
Diotec Semiconductor BZX84B4V3-AQ SemiconductorsDescription
The Diotec Semiconductor BZX84B4V3-AQ Zener Diode features a 4.3V nominal Zener voltage with ±2% tolerance and a low leakage current of 3μA at 1V. It offers a power dissipation of 300mW and is housed in a compact SOT-23 surface-mount package. This diode is ideal for voltage stabilization and is AEC-Q101 qualified.
Manufacturer
Part #
Category
Texas Instruments THS4535 SemiconductorsDescription
The Texas Instruments THS4535 is a high-precision, 60MHz fully differential amplifier designed to drive ADCs up to 2MSPS. It offers superior performance over traditional dual op amps with higher bandwidth and better phase balance. This amplifier operates in a temperature range of -40°C to 125°C, making it ideal for various applications including differential active filters and motor drives.
Manufacturer
Part #
Category
Diotec Semiconductor GBI40M-T SemiconductorsDescription
The Diotec Semiconductor GBI40M-T Single Phase Bridge Rectifier is equipped with four diodes in a bridge configuration and is protected against reverse assembly. It features a 1000V reverse voltage, 700V input voltage, and a 70A repetitive peak forward current. This bridge rectifier is suitable for applications such as 50Hz/60Hz rectification and power supplies.
Manufacturer
Part #
Category
Texas Instruments ISO6463 SemiconductorsDescription
The Texas Instruments ISO6463 Digital Isolator is a six-channel device designed for applications requiring up to 5000V RMS isolation rating per UL 1577. It provides high EMC performance while isolating CMOS or LVCMOS digital I/Os and operates within a supply voltage range of 2.25V to 5.5V. This isolator is ideal for power supplies, grid, electricity meters, motor drives, factory automation, and building automation.
Manufacturer
Part #
Category
Marki Microwave MEQ6-7ASM / MEQ7-20ASM SemiconductorsDescription
Marki Microwave MMIC Equalizers are an ideal solution for compensating for low-pass filtering effects in RF/microwave and high-speed digital systems. The devices feature a unique design that delivers superior return loss compared to competitors. The Marki Microwave Equalizers GaAs MMIC technology supplies consistent unit-to-unit performance in a small, low-cost form factor.
Manufacturer
Part #
Category
Vishay Semiconductors 3KDFN12CA thru 3KDFN100CA SemiconductorsDescription
Vishay Semiconductors 3KDFN12CA thru 3KDFN100CA TVS Diodes are Transzorb® TVS designed to protect sensitive electronics from voltage spikes. These diodes provide robust protection against voltage transients from inductive load switching and lightning. The 3KDFN TVS diodes feature a low-profile, leadless DFN package suitable for automated placement in high-volume manufacturing environments.
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-ADG6404 SemiconductorsDescription
The EVAL-ADG6404 Evaluation Board is designed to evaluate and demonstrate the capabilities of the ADG6404 analog 4:1 multiplexer. It features low RON and high continuous current, making it ideal for various applications including automatic test equipment and audio/video switching. This board provides easy connections with wire screw terminals for source and drain pins.
Manufacturer
Part #
Category
Diotec Semiconductor SB1100 SemiconductorsDescription
The Diotec Semiconductor SB1100 Schottky Diode offers a low voltage forward drop and comes in a DO-15 axial package for easy integration. It features a 100V repetitive peak reverse voltage and a maximum average forward rectified current of 1A at 75°C. This diode is RoHS and REACH compliant, making it suitable for various applications including output rectification in DC/DC converters.
