Latest Components
Manufacturer
Part #
Category
onsemi MM5Z3V9 SemiconductorsDescription
onsemi MM5Z3V9 Zener Voltage Regulators are designed to provide precise voltage regulation in compact applications. With a 3.9V Zener voltage and a power dissipation of 500mW, these devices offer reliable performance and protection. Packaged in an SOD-523 surface mount package, they are ideal for high-density PC boards and handheld portables.
Manufacturer
Part #
Category
Guerrilla RF GRF208x SemiconductorsDescription
Guerrilla RF GRF208x Low-Noise Amplifiers are broadband, linear devices with excellent noise figure performance and a high isolation shutdown state. They operate at a 0.1GHz to 7.2GHz tuning frequency range and are designed for high-performance RF applications. These amplifiers are suitable for cellular infrastructure, small cells, and distributed antenna systems.
Manufacturer
Part #
Category
Microchip Technology EV35H80A SemiconductorsDescription
Microchip Technology EV35H80A Ethernet Development Tool is designed to evaluate KSZ9131 Gigabit Ethernet transceivers. This development tool is for use with the EVB-LAN9668 evaluation board. It supports triple-speed physical-layer transceivers for transmitting and receiving data on standard CAT-5, CAT-5e, and CAT6 cables.
Manufacturer
Part #
Category
Semtech SMBJxA SemiconductorsDescription
Semtech SMBJxA Electrostatic Discharge (ESD) Protection Diodes are designed to protect sensitive electronics from latch-up due to lighting, Electrical Overstress (EOS), and Cable Discharge Event (CDE). These unidirectional diodes offer a 600W peak power dissipation at 10x1000μs pulse and feature fast response time, low operating voltage, and low clamping voltage. Ideal for industrial equipment, telecom, and datacom applications.
Manufacturer
Part #
Category
Texas Instruments SN74AVCH8T245 SemiconductorsDescription
The Texas Instruments SN74AVCH8T245 8-Bit Noninverting Bus Transceivers use two separate configurable power-supply rails, allowing for universal low-voltage bidirectional translation between various voltage nodes. It is designed for asynchronous communication between data buses and features control inputs for direction and output enable. With a maximum data rate of 320Mbps, it is suitable for personal electronics and industrial applications.
Manufacturer
Part #
Category
Texas Instruments SN74AHC240/SN74AHC240-Q1 SemiconductorsDescription
Texas Instruments SN74AHC240/SN74AHC240-Q1 Octal Buffers/Drivers are designed to improve the density and performance of clock drivers, 3-state memory-address drivers, and bus-oriented transmitters and receivers. These devices are organized as two 4-bit buffers/line drivers with separate output-enable (OE\) inputs. The Texas Instruments SN74AHC240-Q1 devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Semtech RClamp10022PWQ SemiconductorsDescription
Semtech RClamp®10022PWQ Transient Voltage Suppressor (TVS) is designed for ESD protection of 100BASE-T1 and 1000BASE-T1 interfaces in automotive environments. This two-line suppressor utilizes silicon avalanche technology for excellent ESD and TLP clamping performance. It offers a ±15kV contact rating and ±25kV air discharge protection per IEC 61000-4-2.
Manufacturer
Part #
Category
Coto Technology CT04 SemiconductorsDescription
Coto Technology CT04 Reed Relays are overmolded, mini dry reed switches designed for SMD mounting. These relays are single-pole, single-throw (SPST) types with normally open ruthenium contacts. They are suitable for proximity sensing, hearing aids, pulse counters, and medical applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC139-Q1 SemiconductorsDescription
The Texas Instruments SN74AC139-Q1 Dual 2-to-4 Line Decoder/Multiplexer features dual two-to-four decoders with one active low-output strobe. It operates within a wide voltage range of 1.5V to 6V and is AEC-Q100 qualified for automotive applications. This component is ideal for memory device selection and reducing the number of outputs for chip-select applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC596/SN74AC596-Q1 SemiconductorsDescription
Texas Instruments SN74AC596/SN74AC596-Q1 SIPO Shift Registers contain an 8-bit, serial-in, parallel-out (SIPO) shift register that feeds an 8-bit D-type storage register. The devices are AEC-Q100 qualified for automotive applications and feature a wide operating range of 1.5V to 6V. They are designed to increase the number of outputs on a microcontroller and temporarily store up to 8 bits of data.
