Latest Components
Manufacturer
Part #
Category
onsemi NVD6824NL SemiconductorsDescription
onsemi NVD6824NL Single N-Channel MOSFETs offer low RDS(on) to minimize conduction losses and high current capability. These MOSFETs feature a 100V drain-to-source voltage and a continuous drain current of 41A, making them suitable for automotive applications. They are AEC-Q101 qualified, RoHS-compliant, and designed for solenoid drivers and boost switches.
Manufacturer
Part #
Category
Texas Instruments SN74LV8T273/SN74LV8T273-Q1 SemiconductorsDescription
Texas Instruments SN74LV8T273/SN74LV8T273-Q1 Octal D-Type Flip-Flops include eight positive-edge-triggered D-type flip-flops with a direct active low Clear (CLR) input. These devices operate at a wide range of 1.65V to 5.5V supply voltage and are AEC-Q100 qualified for automotive applications. Ideal for synchronizing digital signals to a clock, they support up to 150Mbps with 5V or 3.3V VCC.
Manufacturer
Part #
Category
Diodes Incorporated PI6CB332202/PI6CB332204 SemiconductorsDescription
Diodes Inc. PI6CB332202/PI6CB332204 2-Input Clock Mux is a low-power device for PCIe 5.0/6.0 applications. It supports two reference inputs to fanout two/four low-power differential HCSL outputs up to 400MHz, with on-chip terminations for 85Ω or 100Ω output impedance. The device features power management capabilities and supports automatic output clock locking upon loss of input clock.
Manufacturer
Part #
Category
Texas Instruments SN74AHC373 & SN74AHC373-Q1 SemiconductorsDescription
Texas Instruments SN74AHC373 and SN74AHC373-Q1 Octal D-Type Latches are high-speed CMOS logic devices designed for octal transparent D-type latches with 3-state outputs. They operate within a supply voltage range of 2V to 5.5V and support high performance in digital systems. These devices are AEC-Q100 qualified for automotive applications and are available in a wettable flank QFN package.
Manufacturer
Part #
Category
Texas Instruments SN74LV8T374-Q1 SemiconductorsDescription
The Texas Instruments SN74LV8T374-Q1 consists of eight D-type flip-flops with 3-state outputs and integrated-level translation. It operates over a wide supply voltage range of 1.65V to 5.5V and is AEC-Q100 qualified for automotive applications. Typical applications include parallel data synchronization, storage, and shift registers.
Manufacturer
Part #
Category
Abracon ALND-WB SemiconductorsDescription
Abracon ALND-WB Low Noise Amplifiers (LNAs) are designed using advanced InGaAs pHEMT or GaAs E/D-pHEMT processes, featuring wideband operation from 0.8GHz to 10.5GHz. These amplifiers deliver high gain and low noise figures, ensuring enhanced signal clarity and system sensitivity. Ideal for various RF applications, they provide reliable solutions for advanced systems.
Manufacturer
Part #
Category
onsemi NZ8P SemiconductorsDescription
onsemi NZ8P Zener Protection Diodes are designed to safeguard sensitive electronic components from electrostatic discharge (ESD) and transient voltage events. They feature a low clamping voltage and fast response time, making them ideal for high-speed data lines and low-voltage applications. The NZ8P provides reliable overvoltage protection without compromising signal integrity.
Manufacturer
Part #
Category
onsemi NL5X4002 SemiconductorsDescription
onsemi NL5X4002 Level Translators are 2-bit configurable, dual-supply, bidirectional, auto-sensing translators that do not require directional control pins. They are integrated with 10k pull-up resistors on the I/O line and designed to track two different power supply rails. These translators are ideal for low-voltage ASIC-level translation and applications such as mobile phones and cameras.
Manufacturer
Part #
Category
Central Semiconductor CDMS24720-170 / CDMS24740-170 SemiconductorsDescription
Central Semiconductor 1700V N-Channel Silicon Carbide (SiC) MOSFETs are designed for high-speed switching and fast reverse recovery applications. These MOSFETs feature a gate-source voltage (VGS) rating of 20V and a continuous drain current (ID) of 37A or 26A. They support higher breakdown voltage and better thermal conductivity.
Manufacturer
Part #
Category
onsemi NUD4700 SemiconductorsDescription
onsemi NUD4700 LED Shunts are designed for use with 1W LEDs, providing a current bypass in case of an open circuit. They automatically reset when the LED is replaced or healed, featuring a typical ON-state voltage of 1V and an OFF-state current of less than 250μA. These shunts are AEC-Q101 qualified, RoHS compliant, and ideal for applications requiring high reliability.
