Latest Components
Manufacturer
Part #
Category
onsemi NTK3139P SemiconductorsDescription
The onsemi NTK3139P P-Channel Single Power MOSFET is designed for low logic level gate drive applications. It features a compact SOT-723 package with built-in ESD protection and a low RDS(on) rating of 0.95Ω at 1.5V. This device is ideal for load/power switching and battery management in ultra-small portable electronics.
Manufacturer
Part #
Category
Analog Devices Inc. OPx82 SemiconductorsDescription
The Analog Devices OPx82 series includes the OP282 (dual) and OP482 (quad) operational amplifiers, designed for low power consumption while delivering high speed. These amplifiers feature a typical slew rate of 9V/µs and a gain bandwidth of 4MHz, making them suitable for battery-powered applications. With a JFET input stage, they maintain low bias current and offset voltage, ensuring high performance across various conditions.
Manufacturer
Part #
Category
Diodes Incorporated DTH1006P5 SemiconductorsDescription
The Diodes Inc. DTH1006P5 is a 600V peak repetitive reverse voltage rectifier in a PowerDI®5 package. It features a 10A average rectified output current and a 120A non-repetitive peak forward surge current. This rectifier offers high surge current capability, low leakage current, and fast reverse-recovery time.
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-INAMP-ICF-RMZ SemiconductorsDescription
The Analog Devices EVAL-INAMP-ICF-RMZ Evaluation Board allows users to evaluate the AD8237 or AD8420 instrumentation amplifier. It features adjustable gain resistors and includes a bandwidth mode switch for added convenience. The board is designed for optimal signal integrity with SMA/SMB outlines at the input and output.
Manufacturer
Part #
Category
Texas Instruments SN74AHCT273/SN74AHCT273-Q1 SemiconductorsDescription
Texas Instruments SN74AHCT273/SN74AHCT273-Q1 Octal D-Type Flip-Flops include 8 positive-edge-triggered D-type flip-flops with a direct Clear (CLR) input. These devices are designed to store and synchronize digital data across eight channels. Typical applications include buffers, storage registers, and network switches.
Manufacturer
Part #
Category
Texas Instruments SN74CB3T3245 SemiconductorsDescription
Texas Instruments SN74CB3T3245 8-Bit FET Bus Switches are high-speed, TTL-compatible switches with low ON-state resistance for minimal propagation delay. These Bus switches support mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks VCC. Typical applications include level translation, PCI interface, USB interface, and Bus isolation.
Manufacturer
Part #
Category
Texas Instruments TSDx-Q1 SemiconductorsDescription
Texas Instruments TSDx-Q1 Unidirectional TVS Diodes are designed to clamp harmful transients such as ESD and surge. These diodes provide ESD protection up to ±30kV and feature <20pF IO capacitance with 50nA maximum ultra-low leakage current. They are AEC-Q100 qualified for automotive applications and suitable for I/O and power line protection.
Manufacturer
Part #
Category
ECS ECS-TXO-16CSMV4 SemiconductorsDescription
ECS ECS-TXO-16CSMV4 Clipped Sine Wave Temperature Compensated Crystal Oscillators (TCXOs) provide exceptional frequency stability and precision in compact electronic systems. They support a wide input voltage range from 1.7V to 3.6V and feature a clipped sine wave output with a peak-to-peak voltage of 0.8V. With a frequency range of 26MHz to 52MHz and low phase noise, these oscillators are ideal for precision timing circuits.
Manufacturer
Part #
Category
Texas Instruments SN74AC126/SN74AC126-Q1 SemiconductorsDescription
Texas Instruments SN74AC126/SN74AC126-Q1 Quad Non-Inverting Buffers contain four independent buffers with 3-state outputs and Schmitt-trigger inputs. Each gate performs the Boolean function Y = A in positive logic. These devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC125/SN74AC125-Q1 SemiconductorsDescription
Texas Instruments SN74AC125/SN74AC125-Q1 Quad 2-Input AND Gates contain four independent buffers with 3-state outputs. Each gate performs the Boolean function Y = A in positive logic and has an independent active-low output enable. These devices are AEC-Q100 qualified for automotive applications.
