Latest Components
Manufacturer
Part #
Category
Nexperia BUK6Q66-60PJ SemiconductorsDescription
Nexperia BUK6Q66-60PJ MOSFET is a 60V, automotive, P-channel enhancement mode FET in a compact MLPAK33 package. It features logic-level compatibility and is ideal for applications such as reverse polarity protection and high-speed line drivers. This MOSFET is AEC-Q101 qualified, ensuring reliability in automotive environments.
Manufacturer
Part #
Category
NXP Semiconductors MCX A34x SemiconductorsDescription
The NXP Semiconductors MCX A34x Arm® Cortex®-M33 Microcontrollers support running up to 180MHz, 1MB of Flash, and 256kB RAM. They are optimized for motor control applications with integrated FlexPWM, ADCs, and SmartDMA. These microcontrollers are designed to accelerate embedded system development.
Manufacturer
Part #
Category
Texas Instruments MSPM0L111x SemiconductorsDescription
Texas Instruments MSPM0L111x Mixed-Signal Microcontrollers are ultra-low-power, highly-integrated 32-bit MCUs based on the Arm Cortex-M0+ core, operating at up to 32MHz. They feature excellent low-power consumption, high-performance analog peripherals, and support for a wide supply voltage range. With up to 128KB of flash memory and various communication interfaces, these MCUs are ideal for a range of applications including battery management and smart metering.
Manufacturer
Part #
Category
Texas Instruments TCAL6416R SemiconductorsDescription
The Texas Instruments TCAL6416R I2C-Bus/SMBus I/O Expander provides general-purpose output (I/O) and parallel input expansion for the two-line bidirectional SMBus or I2C bus protocol. It supports a power supply voltage range of 1.08V to 3.6V and various I2C clock frequencies. This device is ideal for applications requiring additional I/Os for sensors, switches, and LEDs.
Manufacturer
Part #
Category
onsemi SZMMSZ52xT1G SemiconductorsDescription
onsemi SZMMSZ52xT1G Automotive Zener Voltage Regulators are robust, surface-mount devices designed to provide precise voltage regulation and overvoltage protection in automotive and industrial applications. They offer a wide breakdown voltage range from 2.4V to 110V and are qualified to AEC-Q101 standards for high reliability. Ideal for use in electronic control units, sensor interfaces, and battery management circuits.
Manufacturer
Part #
Category
Nexperia NXU0104 SemiconductorsDescription
Nexperia NXU0104, NXU0204, and NXU0304 Evaluation Boards are designed to evaluate the performance and characteristics of the NXU0104, NXU0204, and NXU0304 voltage-level translating buffers. These boards integrate series resistors and parallel loads on each input/output line, allowing for effective simulation of the device in a system. They feature Schmitt trigger inputs and a weak pull-down resistor to accommodate slow or noisy input signals.
Manufacturer
Part #
Category
Texas Instruments SN74AC3G98/SN74AC3G98-Q1 SemiconductorsDescription
Texas Instruments SN74AC3G98/SN74AC3G98-Q1 Gates incorporate three independent '98 function configurable logic gates with Schmitt-trigger inputs. Each gate can be adjusted to a variety of 1- and 2-input logic functions by connecting unused inputs to the supply or ground. The device is AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC3G97/SN74AC3G97-Q1 SemiconductorsDescription
Texas Instruments SN74AC3G97/SN74AC3G97-Q1 Gates are triple configurable gates with Schmitt-trigger inputs. They offer three independent '97 function configurable logic gates that can be configured for various logic operations. The device is AEC-Q100 qualified for automotive applications, ensuring reliability in demanding environments.
Manufacturer
Part #
Category
Texas Instruments SN74AC2G101/SN74AC2G101-Q1 SemiconductorsDescription
Texas Instruments SN74AC2G101/SN74AC2G101-Q1 Gates feature two independent D-type flip-flops with rising-edge triggered configurable logic clock, active-low clear, and data inputs. The clock inputs can be arranged for multiple logic functions, including buffer, inverter, AND, OR, NAND, NOR, XOR, and XNOR. This device is AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC2G100/SN74AC2G100-Q1 SemiconductorsDescription
Texas Instruments SN74AC2G100/SN74AC2G100-Q1 Dual Flip-Flops offer two independent D-type flip-flops with a rising-edge triggered clock and configurable logic data inputs. These flip-flops support various logic functions and are AEC-Q100 qualified for automotive applications. They are designed to operate in noisy environments and can handle slow edge-rate signals.
