Latest Components
Manufacturer
Part #
Category
Analog Devices Inc. ADL8122 SemiconductorsDescription
The Analog Devices ADL8122 Wideband Low Noise Amplifier (LNA) operates from 10kHz to 10GHz with a typical gain of 17dB and noise figure of 2dB from 2GHz to 6GHz. It features a quiescent current of 95mA and is housed in a RoHS-compliant, 2mm x 2mm, 8-lead LFCSP package. This device is ideal for applications in telecommunications, instrumentation, radar, and electronic warfare.
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-KW4101Z SemiconductorsDescription
The Analog Devices EVAL-KW4101Z KWIK Demo Board is designed for evaluating current through a precision integrating transimpedance amplifier (TIA). It measures femto ampere (fA) levels of dark current and pico ampere (pA) levels of signal current using an integrated LED. This board is ideal for applications in precision data acquisition systems and optical networking equipment.
Manufacturer
Part #
Category
Alliance Memory ASFCxG31MA-51BIN SemiconductorsDescription
Alliance Memory ASFCxG31MA-51BIN Embedded MultiMediaCards (e.MMCs) are managed NAND memory solutions designed for faster throughput and improved reliability. They feature a configurable drive strength and are backwards compatible with previous e.MMC specifications. Ideal for consumer electronics, gaming consoles, and industrial applications.
Manufacturer
Part #
Category
Abracon ASWD-S2 SemiconductorsDescription
Abracon ASWD-S2 RF Switches are wideband and high-linearity RF switches designed for exceptional performance across diverse frequency bands. These Single-Pole, Double-Throw (SPDT) reflective switches deliver low insertion loss, high isolation, and superior signal integrity. Ideal for general-purpose RF applications, they support a wide voltage range and temperature range.
Manufacturer
Part #
Category
ISSI IS25LP512MJ & IS25WP512MJ SemiconductorsDescription
The ISSI IS25LP512MJ and IS25WP512MJ Flash Memory Devices are versatile storage solutions designed for systems that require limited space, low pin count, and low power consumption. They feature a 4-wire SPI interface and support Double Transfer Rate (DTR) commands for efficient data transfer. With more than 20 years of data retention, these devices are ideal for various applications.
Manufacturer
Part #
Category
ROHM Semiconductor LM2904 & LM2902 SemiconductorsDescription
ROHM Semiconductor LM2904 and LM2902 Ground Sense Operational Amplifiers (Op-Amps) are operable from almost GND level for both input and output. These Op-Amps are designed to operate on a single or dual power supply and feature a maximum junction temperature of 150°C. Typical applications include automotive electronics, consumer electronics, and active filters.
Manufacturer
Part #
Category
ROHM Semiconductor BD74C32FV-C SemiconductorsDescription
The ROHM Semiconductor BD74C32FV-C is designed for 1.65V to 5.5V power supply voltage operation. It features a low current consumption of 10µA and a maximum propagation delay of 12ns at 3V. This OR gate is ideal for automotive applications and comes in a compact SSOP-B14 package.
Manufacturer
Part #
Category
Texas Instruments ISO654x/ISO654x-Q1 SemiconductorsDescription
Texas Instruments ISO654x/ISO654x-Q1 Quad-Channel Functional Isolators are designed for cost-sensitive, space-constrained applications requiring isolation for non-safety applications. They support high EMC performance while isolating CMOS or LVCMOS digital I/Os, with an isolation barrier capable of handling transient overvoltages. These devices feature enable pins for high impedance outputs.
Manufacturer
Part #
Category
Texas Instruments SN74AC00/SN74AC00-Q1 SemiconductorsDescription
Texas Instruments SN74AC00/SN74AC00-Q1 Quad 2-Input Positive-NAND Gates contain four independent 2-input NAND gates. These devices operate within a 2V to 6V VCC range and accept input voltages up to 6V. They are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC153-Q1 SemiconductorsDescription
Texas Instruments SN74AC153-Q1 Dual 4-to-1 Line Data Selectors/Multiplexers are designed to select one of four data sources with full binary decoding. Each channel includes a strobe input that forces the output low when activated. This component is AEC-Q100 qualified, making it suitable for automotive applications.
