Latest Components
Manufacturer
Part #
Category
L-Com Simplex SC/UPC to SC/UPC Fiber Optic Patch Cables ConnectorsDescription
Simplex fiber optic patch cables with SC/UPC connectors on both ends for reliable single-fiber data transmission. They feature robust jacket options, push-pull locking connectors, a 2 mm cable diameter, and maximum insertion loss of 0.3 dB.
Manufacturer
Part #
Category
TE Connectivity SNGS PassivesDescription
TE Connectivity SNGS Low Hardness Conductive Elastomers are soft silicone nickel graphite materials designed for EMI shielding and environmental sealing. With 40 Shore hardness, they provide reliable shielding and sealing with low compression force and accommodate component height variation. They are available in extrusion and molding grades for automotive, medical, data, connectivity, energy, and other applications.
Manufacturer
Part #
Category
congatec conga-HPC/cPTL SemiconductorsDescription
The congatec conga-HPC/cPTL is a COM-HPC Client Size A module based on Intel Core Ultra Series 3 processors, featuring PCIe Gen 5, USB 4, LPCAMM2 LPDDR5 memory, and an integrated NPU. It provides up to 180 TOPS of energy-efficient embedded computing performance and operates across an extended industrial temperature range of -40°C to +85°C. The module is designed for high-performance embedded, edge computing, AI, industrial automation, robotics, medical, and transportation applications.
Manufacturer
Part #
Category
Amphenol Industrial ePower-Lite Mini X ConnectorsDescription
Compact two-position high-voltage connectors designed for space-constrained electrification applications. They support up to 1000VDC and 25A with 2.5mm² wire or 35A with 4mm² wire, with optional HVIL and EMI shielding, IP67/IP6K9K sealing, and touch-safe protection.
Manufacturer
Part #
Category
TE Connectivity L001016-01 PassivesDescription
TE Connectivity's Ultra-Wide Band antenna and evaluation board supports UWB Channels 9 and 10 across the 7737.6 MHz to 8736.0 MHz frequency range. It features a wide angle of arrival range exceeding 120°, greater than 60% average efficiency, peak gain of 3.4 dBi, and maximum VSWR below 2:1. Applications include motion and presence detection, obstacle detection, collision avoidance, RTLS, navigation, and secure access.
Manufacturer
Part #
Category
L-Com ConnectorsDescription
Single-mode simplex fiber optic patch cables with LC and UPC connectors for high-speed, high-bandwidth data transmission. They feature a 2 mm cable diameter and are available in 1 m, 3 m, 5 m, 7 m, and 10 m lengths.
Manufacturer
Part #
Category
Bourns MAG-3002177 PassivesDescription
Bourns MAG-3002177 single-phase power inductors are designed for high-efficiency and high-power-density operation in the Texas Instruments TIDA-010954 600W GaN-based cycloconverter reference design. They feature 3.2 µH inductance, low 7.63 mΩ typical DCR, and high saturation current for inverters, microinverters, and portable battery storage applications.
Manufacturer
Part #
Category
Toshiba DCL321C00(T,E(S SemiconductorsDescription
The Toshiba DCL321C00(T,E(S) is a two-channel low-power digital isolator with a 25 Mbps data rate and 1:1 channel configuration. It provides 3000 Vrms isolation and operates from a 2.25 V to 5.5 V supply over a -40°C to +125°C temperature range.
Manufacturer
Part #
Category
Texas Instruments ISOTMP35R/-Q1 SensorsDescription
Reinforced isolated analog temperature sensor ICs with an integrated isolation barrier and 10mV/°C output slope with a 500mV offset at 0°C. They operate from 3.1V to 34V, provide 5kVRMS reinforced isolation, and support temperature measurement from -40°C to +150°C. The ISOTMP35R-Q1 version is AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Sanyo Denki San Ace 52 9RA PowerDescription
Low-noise 52mm x 15mm DC fans designed for efficient cooling in low-power equipment such as medical devices, inverters, chip mounters, servo amplifiers, and switching power supplies. They operate from 5V to 24V with rated input power from 0.3W to 0.53W and a temperature range of -20°C to +70°C.