Latest Components
Manufacturer
Part #
Category
Taiwan Semiconductor PLDS20J & PLDS20JH SemiconductorsDescription
Taiwan Semiconductor PLDS20J and PLDS20JH Rectifiers are 20A, 600V standard rectifiers with low forward voltage drop and high surge current capability. They operate within a junction temperature range of -55°C to 175°C and are AEC-Q101 qualified. These rectifiers are RoHS compliant and suitable for applications such as Switching Mode Power Supply (SMPS) and onboard chargers.
Manufacturer
Part #
Category
TE Connectivity / Linx Technologies L000951-01 ConnectorsDescription
TE Connectivity / Linx Technologies Wi-Fi® Chip Antennas offer a full range of single, dual, and tri-band Wi-Fi coverage to support up to Wi-Fi 6E, Wi-Fi 7, and Wi-Fi 8. These antennas are designed for various IoT applications, featuring good Voltage Standing Wave Ratio (VSWR) and gain, along with a compact size. They support multiple wireless protocols including WLAN, ZigBee, and Bluetooth.
Manufacturer
Part #
Category
CUI Inc DQD6 PowerDescription
CUI Inc DQD6 DC-DC Converters offer up to 6W isolated output, 1500VDC isolation, and a temperature range of -40°C to +85°C. Features include single and dual regulated outputs, remote on/off control, and various mounting options. These converters are ideal for ITE, commercial, and industrial applications.
Manufacturer
Part #
Category
ROHM Semiconductor RQ3P270BLFRA PowerDescription
ROHM Semiconductor RQ3P270BLFRA Power MOSFET is an automotive-grade MOSFET that is AEC-Q101 qualified. The devices supply 100V drain-source breakdown voltage, 29mΩ static drain-source on-state resistance, and ±27A continuous drain current. The ROHM RQ3P270BLFRA Power MOSFETs are ideal for automotive applications, including ADAS, infotainment, lighting, and body.
Manufacturer
Part #
Category
EPCOS / TDK G14 & G20 SemiconductorsDescription
EPCOS / TDK G14 and G20 G-Series Gas-Discharge Tube (GDT) Varistors feature a hybrid design with 14mm and 20mm rated disk diameters. These low-leakage varistors are coated in flame-retardant epoxy and offer a maximum operating temperature of +105°C. They are suitable for applications such as power supplies, chargers, and surge protection devices.
Manufacturer
Part #
Category
GCT USB4736 ConnectorsDescription
The GCT USB4736 6-Pin Vertical IP67 USB Type-C® Connector is designed for exceptional PCB retention with SMT contact pins and through-hole shell stakes. It features a 3A current rating at a 48V voltage rating and is suitable for the Pin-In-Paste (PIP) reflow solder process. This connector is ideal for various applications including portable electronics and audio equipment.
Manufacturer
Part #
Category
IEI Technology AUPS2-B20 PowerDescription
The IEI AUPS2-B20 Gen2 Intelligent DC UPS Module is a rugged 100W UPS module designed for DC 12V to 24V input, providing over 140 minutes of operation time. It features web-based remote network management and protects equipment from power surges and transients. This module is ideal for applications requiring stable power delivery during line sags and spikes.
Manufacturer
Part #
Category
IEI Technology RHEA-E1260A PowerDescription
The IEI RHEA-E1260A Supercapacitor Uninterruptible Power Supply (UPS) can be equipped with twelve 600F supercapacitors at a maximum 150W load, with 2.6V at 30°C lasting 100 sec. It offers a wide temperature range of -40°C to 60°C and boasts 500,000 charge-discharge life cycles. This UPS is designed for various application scenarios with different backup time and size solutions.
Manufacturer
Part #
Category
ROHM Semiconductor BD68960EKV-C PowerDescription
The ROHM Semiconductor BD68960EKV-C Stepping Motor Driver is a low-consumption bipolar driver driven by PWM current with a rated power supply voltage of 35V. It features PARA-IN drive mode, a rated output current of 1.8A, and operates within a temperature range of -40°C to 125°C. Typical applications include Exhaust Gas Recirculation (EGR) valves, printers, monitoring cameras, sewing machines, and robots.
Manufacturer
Part #
Category
EPCOS / TDK S30 & S36 PassivesDescription
EPCOS / TDK S30 and S36 NTC ICL Thermistors are designed for inrush current limiting in switch-mode power supplies and soft-start motors. They feature a UL 94 V-0 flame-retardant coating, with resistance values ranging from 2Ω to 20Ω and current ratings from 10A to 30A. These thermistors ensure highly stable electrical characteristics and are suitable for a wide operating temperature range.
