Latest Components
Manufacturer
Part #
Category
Schurter DG11 PowerDescription
Schurter DG11 Power Entry Modules are IEC appliance inlet C14 or C18 with circuit breaker TA35 2-pole with thermal or thermal-magnetic release. These modules are designed to avoid potential damage to equipment caused by increased short-circuit protection. They feature a V-lock notch standard, pre-wired coupling, and are compatible with V-lock cord retention.
Manufacturer
Part #
Category
Diodes Incorporated AP74502Q/AP74502HQ PowerDescription
The Diodes Incorporated AP74502Q/AP74502HQ Controllers are AEC-Q100 qualified devices designed for input protection in automotive systems, capable of operating at input voltages from 3.2V to 75V. They feature reverse battery polarity and overvoltage protection, making them suitable for various automotive applications. These controllers are halogen-free, lead-free, and fully RoHS compliant, available in an 8-Pin SOT28 package.
Manufacturer
Part #
Category
Texas Instruments LMH13000 PowerDescription
The Texas Instruments LMH13000 is a high-speed pulsed and continuous output current driver designed for LiDAR applications. It supports fast rise and fall times of less than 1ns and can deliver continuous currents up to 1A and pulsed currents up to 5A. The device features an integrated thermal shutdown for protection and operates within a wide voltage range of 3V to 5.5V.
Manufacturer
Part #
Category
MEAN WELL LRS-1200 PowerDescription
MEAN WELL LRS-1200 Enclosed Type Power Supplies offer a 1200W power rating and a low-profile design with 3G anti-vibration capability. They feature an input range of 180VAC to 305VAC and provide output voltage options of 12V, 24V, 36V, and 48V. These power supplies comply with international safety regulations and include various protections such as short circuit and overload.
Manufacturer
Part #
Category
TDK Corporation ADL4524VL PassivesDescription
TDK has launched its ADL4524VL series of wire-wound inductors designed for automotive power-over-coax applications. These inductors feature a wide frequency range beyond 1 GHz and are suitable for high temperature environments, supporting operation from -55 °C to +155 °C. The innovative design reduces the footprint by minimizing the number of inductors required for effective power and data signal separation.
Manufacturer
Part #
Category
Texas Instruments TAC5301-Q1 SemiconductorsDescription
The Texas Instruments TAC5301-Q1 is a low-power audio codec designed for automotive applications, featuring a 100dB dynamic range ADC and supporting both differential and single-ended inputs. It is AEC-Q100 qualified and ideal for telematics control units and automotive head units. This codec offers advanced features such as voice activity detection and low latency filter options.
Manufacturer
Part #
Category
Texas Instruments SN74LVC1G16 SemiconductorsDescription
Texas Instruments SN74LVC1G16 Inverter Buffer offers a Schmitt-Trigger input and an open-drain output. This buffer operates at a voltage range of 1.65V to 5.5V with 5.5V-tolerant input pins. Typical applications include combining power-good signals and enabling digital signals.
Manufacturer
Part #
Category
Amphenol RF 189104469 ConnectorsDescription
Amphenol RF SMPM Plug-to-Plug Cable Assemblies are designed on RG-178 cables and feature a micro-miniature interface with push-on mating styles for quick installation. These assemblies operate at a frequency range of DC to 18GHz and are ideal for high-vibration environments. Available in various configurations and lengths, they are suitable for applications such as antennas, military, and quantum computing.
Manufacturer
Part #
Category
HARTING har-flex-IDC ConnectorsDescription
HARTING har-flex® Board Insulation Displacement Connectors (IDCs) are a compact, permanent cable-to-board solution designed for applications where a pluggable connection is not required. These IDCs are compatible with 1.27mm ribbon cables and available in various pin sizes from 6 to 100. They enhance mechanical reliability and optimize space utilization on PCBs.
Manufacturer
Part #
Category
Sanyo Denki San Ace 200x70 9GA PowerDescription
The Sanyo Denki San Ace 200x70 9GA Low Power Consumption DC Fan operates on about 36% less power while maintaining the same airflow and static pressure. It features a 36V to 60V operating voltage range and is designed for applications such as data centers and server racks. This fan is made with lead-free brass and complies with the RoHS directive.
