Latest Components
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-ADXL366Z SensorsDescription
The Analog Devices EVAL-ADXL366Z Breakout Board is designed for quick evaluation of the ADXL366, an ultra-low-power, 3-axis MEMS accelerometer. It features two 5-pin headers for access to communication and interrupt pins, and includes mounting holes for compatibility with the EVAL-XLMOUNT1 block. This board is ideal for applications such as vital signs monitoring and smart home devices.
Manufacturer
Part #
Category
Nuvoton N9H30 SemiconductorsDescription
Nuvoton N9H30 32-bit Microprocessors embed a CPU core ARM926EJ-S, run up to 300MHz, and include 56KB embedded SRAM and 16KB internal boot ROM. They integrate a USB 2.0 HS HOST/device controller and a TFT-type LCD controller, along with a DRAM I/F that supports DDR or DDR2 type SDRAM. These microprocessors are designed for high performance and ease of system design.
Manufacturer
Part #
Category
TDK Corporation YFF series PassivesDescription
TDK has expanded its YFF series of 3-terminal filters for automotive applications to include higher voltages up to 35 V and higher capacitances up to 4.7 µF. These components are designed to suppress voltage variation and high-frequency noise, which can lead to system malfunctions. The new filters contribute to reducing component count and miniaturizing automotive electronic systems.
Manufacturer
Part #
Category
TDK Corporation ADL8030VA PassivesDescription
The ADL8030VA is a high-performance inductor designed for power-over-coaxial (PoC) applications, streamlining filter design by requiring only one component. It offers high impedance over a wide frequency range and is suitable for advanced driver-assistance systems (ADAS) and other automotive electronics. With a compact design and AEC-Q200 qualification, it ensures durability and efficiency in harsh automotive conditions.
Manufacturer
Part #
Category
TDK Corporation MPZ1608-PH PassivesDescription
TDK's MPZ1608-PH series offers large-current multilayer chip beads with a rated current of 8 A, making them ideal for automotive and commercial power supply lines. These components reduce the footprint and number of components needed in circuits, enhancing reliability in high-temperature environments. Designed for noise suppression in power and signal circuits, they are suitable for various applications including automotive and industrial equipment.
Manufacturer
Part #
Category
TDK Corporation MUQ0201022HA PassivesDescription
TDK's MUQ0201022HA series features the smallest inductors in the industry at 0201 size, achieving high-frequency characteristics through advanced technologies. These inductors maintain the same electrical performance as larger models while significantly reducing mounting area. Ideal for mobile and wearable devices, they cover inductance values from 0.6 nH to 3.6 nH.
Manufacturer
Part #
Category
Amphenol / SV Microwave 164882869 PassivesDescription
Amphenol / SV Microwave Integrated RF Filters provide a unique combination of a compact design and high-frequency performance. These low-pass filters support passbands from DC to 12GHz or 18GHz, suppressing unwanted spectral content in tightly packed RF systems. They are optimized for mil-aero, satellite, and radar applications where signal integrity and reliability are essential.
Manufacturer
Part #
Category
Abracon ABM8N PassivesDescription
Abracon ABM8N Low ESR Ceramic SMD Crystals are engineered for applications requiring stable timing in compact spaces. They support a frequency range from 10MHz to 54MHz and operate in the fundamental mode, offering frequency stability options down to ±10ppm. Their low ESR contributes to efficient oscillator performance, making them ideal for various applications including wearables and IoT devices.
Manufacturer
Part #
Category
onsemi NXH015F120M3F1PTG PowerDescription
The onsemi NXH015F120M3F1PTG Silicon Carbide (SiC) Module features a 15mΩ/1200V M3S SiC MOSFET full-bridge topology and a thermistor with Al2O3 DBC in an F1 package. It supports a gate source voltage of +22V/-10V and a continuous drain current of 77A at 80°C. This module is ideal for applications such as solar inverters, uninterruptible power supplies, and electric vehicle charging stations.
Manufacturer
Part #
Category
Apogee Semiconductor APIO16 SemiconductorsDescription
The Apogee Semiconductor APIO16 Rad-Hard I/O Expander provides robust and flexible I/O expansion capabilities with voltage level translation, ensuring reliable operation across varying supply voltages. It supports two independent supply rails for seamless interfacing between low-voltage microcontrollers and higher-voltage peripherals. The device implements an SMBus-compatible I2C or SPI-based serial bus with two 8-bit ports.
