Latest Components
Manufacturer
Part #
Category
Texas Instruments LMK5C22212AS1 PowerDescription
The Texas Instruments LMK5C22212AS1 Network Synchronizer is a high-performance jitter cleaner designed for wireless communications and infrastructure applications. It features two DPLLs for hitless switching and jitter attenuation, with programmable loop bandwidth and no external loop filters. This device is fully programmable through SPI or I2C and includes integrated EEPROM for customizable system start-up clocks.
Manufacturer
Part #
Category
KOA Speer WN73H PassivesDescription
KOA Speer WN73H Metal Thin Film Chip Resistors are high-power, wide-termination, and high-precision resistors suitable for automotive, medical, and industrial applications. They offer power ratings of 0.3W in a 0603 package and 1W in a 1206 package, with resistance values ranging from 10Ω to 100kΩ. These resistors provide high-precision tolerances as low as ±0.1% and a temperature coefficient of resistance (TCR) down to ±10ppm/°C.
Manufacturer
Part #
Category
Murata Electronics SCH16T-K10 SensorsDescription
Murata Electronics SCH16T-K10 6-DOF Gyroscopes and Accelerometers are high-performance sensors that combine a 3-axis angular rate and a 3-axis accelerometer. They feature selectable measurement ranges and extensive self-diagnostics, making them suitable for applications like drone flight controllers and inertial measurement units. Designed for high stability and reliability, these sensors are based on advanced 3D-MEMS technology.
Manufacturer
Part #
Category
Texas Instruments SN74AHC240/SN74AHC240-Q1 SemiconductorsDescription
Texas Instruments SN74AHC240/SN74AHC240-Q1 Octal Buffers/Drivers are designed to improve the density and performance of clock drivers, 3-state memory-address drivers, and bus-oriented transmitters and receivers. These devices are organized as two 4-bit buffers/line drivers with separate output-enable (OE\) inputs. The Texas Instruments SN74AHC240-Q1 devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Semtech RClamp10022PWQ SemiconductorsDescription
Semtech RClamp®10022PWQ Transient Voltage Suppressor (TVS) is designed for ESD protection of 100BASE-T1 and 1000BASE-T1 interfaces in automotive environments. This two-line suppressor utilizes silicon avalanche technology for excellent ESD and TLP clamping performance. It offers a ±15kV contact rating and ±25kV air discharge protection per IEC 61000-4-2.
Manufacturer
Part #
Category
Coto Technology CT04 SemiconductorsDescription
Coto Technology CT04 Reed Relays are overmolded, mini dry reed switches designed for SMD mounting. These relays are single-pole, single-throw (SPST) types with normally open ruthenium contacts. They are suitable for proximity sensing, hearing aids, pulse counters, and medical applications.
Manufacturer
Part #
Category
Murata Electronics SCH16T-K10-PCB SensorsDescription
Murata Electronics SCH16T-K10-PCB Sensor Board features the SCH16T-K10 gyroscope and accelerometer pre-mounted on the PCB for evaluation purposes. This sensor board offers SPI communication from pins and includes extensive self-diagnostics. It is designed for high-performance applications with a SafeSPI v2.0 interface.
Manufacturer
Part #
Category
Texas Instruments bq25186 PowerDescription
The Texas Instruments bq25186 Linear Battery Charger IC focuses on a small solution size and low quiescent current to extend battery life. It supports up to 1A charging and system loads of up to 3A, making it ideal for various applications. The device is optimized for battery-to-battery charging and integrates features for thermal regulation and fault protection.
Manufacturer
Part #
Category
Texas Instruments LMR516x5 PowerDescription
Texas Instruments LMR516x5 Synchronous Buck Converters can drive up to 2.5A or 3.5A load current. With an input range of 4.3V to 60V, the devices are designed for various industrial applications requiring power conditioning from an unregulated source. The device features built-in protection and operates at 400kHz or 1.1MHz switching frequency for optimized design size.
Manufacturer
Part #
Category
Texas Instruments SN74AC139-Q1 SemiconductorsDescription
The Texas Instruments SN74AC139-Q1 Dual 2-to-4 Line Decoder/Multiplexer features dual two-to-four decoders with one active low-output strobe. It operates within a wide voltage range of 1.5V to 6V and is AEC-Q100 qualified for automotive applications. This component is ideal for memory device selection and reducing the number of outputs for chip-select applications.
