Latest Components
Manufacturer
Part #
Category
Texas Instruments AFE159x SemiconductorsDescription
The Texas Instruments AFE159x is a family of multichannel, 24-bit, simultaneous sampling delta-sigma analog-to-digital converters designed for medical applications. It features built-in programmable gain instrumentation amplifiers and supports digital pace pulse detection and thoracic impedance measurement. With high levels of integration, the AFE159x enables scalable medical instrumentation systems with reduced power and size.
Manufacturer
Part #
Category
Texas Instruments AFE4462 SensorsDescription
The Texas Instruments AFE4462 is an ultra-small integrated analog front-end designed for optical bio-sensing applications, including SpO2 and heart-rate monitoring. It supports up to four photodiodes and 16 light-emitting diodes, featuring high dynamic range circuitry for precise signal detection. With programmable LED current and low power consumption, it is ideal for wearable devices.
Manufacturer
Part #
Category
Texas Instruments AFE5401-EP SemiconductorsDescription
The Texas Instruments AFE5401-EP Quad-Channel Analog Front-End (AFE) is designed for applications requiring high integration. It features four channels, each with a programmable gain amplifier, low-noise amplifier, programmable equalizer, and an antialias filter, along with a 12-bit ADC. This component is ideal for automotive radar, data acquisition, and SONAR applications.
Manufacturer
Part #
Category
STMicroelectronics STEVAL-BMS114 PowerDescription
The STMicroelectronics STEVAL-BMS114 Battery Management System (BMS) Evaluation Board operates from 1 to 31 Li-ion battery nodes, providing monitoring for voltage, current, and temperature. It manages 4 to 14 cells with a voltage range between 48V and 800V, utilizing the L99BM114 IC for precise measurements. This board is ideal for applications in industrial battery management and high-voltage battery packs.
Manufacturer
Part #
Category
STMicroelectronics STEVAL-BMS114TX PowerDescription
The STMicroelectronics STEVAL-BMS114TX Battery Management System (BMS) Evaluation Board operates from 4 to 14 battery cells and uses an embedded transceiver for isolated connection to an external MCU. It features the L99BM114 Li-ion battery monitoring and protection chip, facilitating high-reliability applications. The board monitors cell and battery node status through various measurements including voltage and temperature.
Manufacturer
Part #
Category
Qorvo QM42655 SemiconductorsDescription
The Qorvo QM42655 Wi-Fi® 7 Front End Module (FEM) is designed for Wi-Fi 7 (802.11be) systems, offering a compact layout with integrated matching. It features a multi-TX-state 2.4GHz Wi-Fi power amplifier, a single-pole four-throw switch, and a low-noise amplifier. This module optimizes output power and efficiency while supporting a wide supply voltage range.
Manufacturer
Part #
Category
Amphenol FCI 181703768 ConnectorsDescription
Amphenol FCI RotaSense™ 2 Position Temperature Sensor Connectors are cost-effective two-piece connectors that accurately measure ambient temperatures. They feature NPN silicon transistors for temperature sensing and optimize fan speed for precise temperature control. Designed for SMT boards, these connectors withstand the IR reflow process and offer a locking feature for positioning at three angles.
Manufacturer
Part #
Category
EPCOS / TDK N27, N87, N88, N92, N95, N97 PassivesDescription
EPCOS / TDK Large-Size Ferrite Cores optimize the magnetic design for efficiency and thermal performance. These cores provide higher power ratings due to bigger air gaps and thicker wires for higher currents. They are suitable for industrial applications, including motor drives and EV charging stations.
Manufacturer
Part #
Category
Newhaven Display NHD-5.5-25664 OptoelectronicsDescription
The Newhaven Display 5.5" Graphic OLED Display Module is a monochrome module built around self-illuminating OLED technology, offering a 256x64 pixel resolution with vibrant green graphics. It features a built-in SSD1322 controller and supports multiple interface options, achieving excellent power efficiency. This module is ideal for applications in consumer electronics, automotive dashboards, and industrial control panels.
Manufacturer
Part #
Category
TAIYO YUDEN MCAS PassivesDescription
TAIYO YUDEN MCAS Series of High Dielectric Automotive MLCCs are AEC-Q200 qualified with up to 47uF ± 20% capacitance and 4V rated voltage. These capacitors feature low Equivalent Series Resistance (ESR) and provide superior noise absorption characteristics. Typical applications include automotive, general digital circuits, and power supply bypass capacitors.
