Latest Components
Manufacturer
Part #
Category
Analog Devices / Maxim Integrated MAX17617EVKIT PowerDescription
The MAX17617EVKIT Evaluation Kit implements the MAX17617 electronic fuse (eFuse) set up for 5V to 28V operation with a 7A auto-retry current limit. It features a 3.3V buck regulator for pull-ups and logic to run indicator LEDs. Additionally, it includes an external N-channel field-effect transistor (FET) for reverse conduction protection.
Manufacturer
Part #
Category
Vishay Semiconductors VS-EBU15006HN4 SemiconductorsDescription
The Vishay Semiconductors VS-EBU15006HN4 Ultrafast Soft Recovery Diode is optimized to reduce losses and EMI/RFI in high-frequency power conditioning systems. It features a 150A continuous forward current and eliminates the need for a snubber in most applications. This diode is AEC-Q101-qualified and is ideal for high-frequency welding and power converters.
Manufacturer
Part #
Category
Microchip Technology EV49N51A PowerDescription
The Microchip Technology EV49N51A Development Tool is an Ethernet to Wi-Fi® Bridge Board that enables Ethernet connectivity on the WFI32E01PE module. It features ready-to-use firmware that bridges Ethernet data from a host device to a Wi-Fi network without requiring additional drivers. This compact board includes a highly integrated Wi-Fi MCU with premium features, allowing quick data connection and transmission.
Manufacturer
Part #
Category
Microchip Technology EV68D28A PowerDescription
The Microchip Technology EV68D28A Development Tool is a WFI32E04 High Pin Count (HPC) curiosity board designed for evaluating the performance of the PIC32MZ-W1 and WFI32 Wi-Fi MCU family. It supports system-level prototyping and IoT cloud connectivity with voice control, featuring integrated headers for easy device connection. The board includes two mikroBUS ports for expanding functionality with MikroElectronika click boards.
Manufacturer
Part #
Category
Analog Devices Inc. ADL8122-EVAL1Z PowerDescription
The ADL8122-EVAL1Z Evaluation Board is a 4-layer PCB designed for RF applications, operating from 10kHz to 10GHz. It features SMA connectors for RF input and output, and is suitable for various electronic test and measurement applications. The board is built to withstand a wide temperature range from -55°C to +125°C.
Manufacturer
Part #
Category
onsemi AR0145CS SensorsDescription
The onsemi AR0145CS Hyperlux™ SG Image Sensor is a 1/4.3" CMOS digital image sensor featuring an active-pixel array of 1280 (H) x 800 (V). It incorporates a global shutter pixel design for accurate capture of moving scenes, producing clear images in various lighting conditions. This sensor is ideal for applications such as scanning, industrial inspection, and gesture recognition.
Manufacturer
Part #
Category
Murata Electronics GGM PassivesDescription
Murata Electronics GGM Water-Repellent Chip Multilayer Ceramic Capacitors (MLCCs) are designed for automotive powertrain and safety equipment. The water-repellent treatment film delays the formation of water droplets on the capacitor's surface, making it suitable for critical applications. These MLCCs are ideal for use in safety devices such as engine control units, airbags, and anti-lock braking systems.
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-LT8350S-AZ PowerDescription
The EVAL-LT8350S-AZ Evaluation Board is based on the LT8350S 40V synchronous buck-boost converter, designed for high efficiency in a compact size. It operates with an input voltage range of 3V to 40V and can drive up to 2.5A load at 12V output. This board is ideal for automotive, industrial, and telecom applications.
Manufacturer
Part #
Category
Analog Devices Inc. LT8740 PowerDescription
The Analog Devices LT8740 Programmable Device Power Supply (DPS) offers high efficiency and performance with two switching power supplies delivering up to ±2A of current each at output voltages spanning 30V. It features integrated current sensing resistors for accurate output current measurement and a linear drive stage for non-switching ripple output. The device is controlled via a simple serial interface and is suitable for applications such as Automatic Test Equipment (ATE).
Manufacturer
Part #
Category
onsemi ARX383CS SensorsDescription
onsemi 0.3MP Image Sensor Evaluation Boards are designed to evaluate and develop imaging applications using an ARX383CS high-efficiency global shutter image sensor. These boards can be interfaced with the Demo3 Evaluation Board or the AP1302 Evaluation Board, providing flexibility in system configuration. This setup is ideal for developers looking to test and optimize imaging solutions efficiently.
