Latest Components
Manufacturer
Part #
Category
CONXALL MULTI-CON-X/MAXI-CON-X ConnectorsDescription
CONXALL MULTI-CON-X / MAXI-CON-X 0.570" OD Sealed Backshells are designed for larger cable sizes with a maximum diameter of 0.570". They are engineered for harsh environments, featuring an IP68 rating when properly installed. The backshells are made from durable materials including black polybutylene terephthalate and include a secure-grip cable clamp for enhanced retention.
Manufacturer
Part #
Category
TDK ACM12V-TL05 PowerDescription
TDK ACM12V-TL05 Common Mode Choke is an AEC-Q200-qualified common-mode choke designed for automotive DC power lines. It supports a rated voltage of up to 500V DC and handles currents of up to 13A with a low DC resistance of 6mΩ. The choke offers high impedance, typically 700Ω at 100MHz, effectively suppressing common-mode noise.
Manufacturer
Part #
Category
Fair-Rite 129020300 PassivesDescription
Fair-Rite Oval Ferrite Snap-It® Cores allow for two cables to be run side-by-side. They are ideal for common-mode chokes, as a filter for inductive circuits, and bus bars. The Snap-It Cores offer several mounting options and are automotive-designed.
Manufacturer
Part #
Category
M5Stack Atomic ToChain ConnectorsDescription
The M5Stack Atomic ToChain Base Interface Adapter Board includes reserved solder pad designs for flexible configuration of the Atom bottom I/O. It converts the Atom controller’s bottom expansion I/O into a male HY2.0-4P connector for easy access to Chain series devices. This board is specifically designed for seamless connectivity between Atom and Chain series devices.
Manufacturer
Part #
Category
Texas Instruments SN74ACT3G98/-Q1 SemiconductorsDescription
The Texas Instruments SN74ACT3G98/-Q1 features three independent 98-function configurable logic gates with Schmitt trigger inputs. It is designed for automotive applications and supports a variety of logic roles. This component is ideal for combining power-good and enable signals while eliminating slow or noisy input signals.
Manufacturer
Part #
Category
Qorvo RFFC2071/2072 SemiconductorsDescription
Qorvo RFFC2071/2072 2.7GHz RF Synthesizer/VCOs are reconfigurable frequency-conversion devices with an integrated fractional-N phase-locked loop (PLL) synthesizer and a voltage-controlled oscillator (VCO). They allow users to generate local oscillator (LO) signals from 85MHz to 2700MHz and can be configured for low-power operation. These devices are ideal for applications such as digital TV repeaters and software-defined radios.
Manufacturer
Part #
Category
Qorvo QPD1011AEVB SemiconductorsDescription
The Qorvo QPD1011AEVB Evaluation Board is a fully assembled RF evaluation board designed for the QPD1011A GaN-on-SiC input-matched transistor. It facilitates device characterization and amplifier prototyping in the 100MHz to 1GHz band, featuring a 50Ω input match and tunable output network. This board is ideal for applications in wideband and narrowband RF power stages for communications, radar, and test instrumentation.
Manufacturer
Part #
Category
TDK Corporation AXO315T1 SensorsDescription
The Tronics AXO315®T1 is a high-temperature MEMS accelerometer designed for measurement while drilling (MWD) applications, capable of operating up to +175 °C. It features a ±14 g input range and offers a digital interface, making it a cost-effective alternative to quartz accelerometers. With a lifetime exceeding 1000 hours at high temperatures, it is ideal for precise downhole navigation in extreme environments.
Manufacturer
Part #
Category
TDK Corporation B25648A PowerDescription
The ModCap UHP series of DC link capacitors by TDK enables continuous operation at temperatures up to +105 °C without derating, setting a new standard for power electronic applications. With a voltage rating of 1350V to 1800V and a capacitance range of 470µF to 880µF, these capacitors are optimized for high-frequency performance in SiC semiconductor-based inverters. Their modular design and high current density make them ideal for renewable energy and industrial motor drive applications.
Manufacturer
Part #
Category
TDK B25648 PowerDescription
TDK's ModCap UHP series features a new high-temperature dielectric film designed for high-power DC-link applications. It operates reliably at temperatures up to +105 °C and offers up to 21% higher current density compared to conventional capacitors. This makes it ideal for demanding applications in renewable energy, electric vehicles, and industrial drives.
