Latest Components
Manufacturer
Part #
Category
NEUTRIK opticalCON D-Size ST Chassis Connector ConnectorsDescription
The NEUTRIK opticalCON D-Size ST Chassis Connector is an ST feedthrough solution in a D-size format designed for easy integration of fiber connections. It features a robust construction with a bayonet coupling, front mounting, and supports up to 5000 mating cycles. Suitable for AV, broadcast, and installation applications, it operates within a temperature range of -40°C to +80°C.
Manufacturer
Part #
Category
Mikroe DAC 24 Click SemiconductorsDescription
Mikroe DAC 24 Click is a compact add-on board for digital-to-analog conversion featuring gain control, offset adjustment, and programmable analog voltage output. It is based on the BD79701FVM-LB, a 3-channel, 8-bit R-2R DAC from ROHM Semiconductor, with a high-speed output response and a 3-wire SPI interface. Ideal for industrial equipment, battery-powered devices, and embedded systems requiring DAC functionality.
Manufacturer
Part #
Category
Mikroe 100MG TPS Pressure Click Board SensorsDescription
The Mikroe 100MG TPS Pressure Click Board is designed for gauge and differential pressure sensing in medical, industrial, and environmental monitoring systems. It features the TPS-100MG-CA1N-00-T low-pressure MEMS sensor from TE Connectivity, supporting both analog output and digital communication via I2C/I3C interfaces. The board is compatible with mikroBUS™ sockets and includes mikroSDK open-source libraries for easy evaluation and customization.
Manufacturer
Part #
Category
Mikroe 6942 SensorsDescription
Light 6 Click is a compact add-on board featuring the Vishay VEML6031X01 high-accuracy ambient light sensor for real-time light level detection and brightness adaptation. It offers a wide dynamic range from 0lx to approximately 172klx with high resolution and human-eye-like spectral response using Filtron technology. The board supports I2C communication and is designed for automotive and embedded applications.
Manufacturer
Part #
Category
Mikroe Boost 10 Click PowerDescription
Mikroe Boost 10 Click is a compact add-on board that provides a stable boosted output voltage for battery-powered devices and other applications requiring a DC/DC voltage increase. It is based on the Analog Devices LT8337 Silent Switcher synchronous step-up DC/DC converter with a wide input range of 3.3V to 10V and selectable regulated output from 5V to 12V. The board features digital output voltage adjustment, low quiescent current, and is suitable for battery-powered systems and portable electronics.
Manufacturer
Part #
Category
Mikroe RF Switch 2 Click SemiconductorsDescription
The Mikroe RF Switch 2 Click is a compact add-on board designed for high-frequency RF signal routing in wireless and signal-management applications. It features the PE42442 6GHz absorptive single-pole quadruple-throw (SP4T) RF switch with four symmetric RF ports and one common RFC port. The board offers high isolation up to 6GHz, an integrated CMOS decoder for simple control, and selectable 3.3V or 5V logic compatibility.
Manufacturer
Part #
Category
Würth Elektronik AEC-Q200 SMD Power Inductors PassivesDescription
Würth Elektronik AEC-Q200 Surface-Mount (SMD) Power Inductors are robust, high-performance components designed for power management applications in automotive electronics. They feature low DC resistance, high self-resonant frequencies, and are qualified to meet stringent automotive reliability standards. These inductors are suitable for use in harsh environments and support a wide range of inductance and current ratings.
Manufacturer
Part #
Category
TE Connectivity CRGSP PassivesDescription
TE Connectivity's CRGSP Thick Film Anti-Sulfur Pulse Chip Resistors offer high reliability and performance in environments prone to sulfur contamination. They feature robust construction, stable electrical characteristics, and support power ratings up to 0.75W. These resistors are suitable for automotive, industrial, consumer electronics, and other demanding applications.
Manufacturer
Part #
Category
M5Stack CLIP-A/B Kits ConnectorsDescription
M5Stack CLIP-A/B Kits are compatible with M5 devices and suitable for multi-scenario applications. The CLIP-A kit supports multiple installation methods including clip-on, cable ties, rails, magnetic attachment, and wall mounting. The CLIP-B kit is designed for LEGO Technic and brick replacement parts, GoPro-compatible brackets, and connects easily with M5 devices for creative and technical projects.
Manufacturer
Part #
Category
M5Stack Atomic Audio-3.5 Base Embedded SolutionsDescription
The M5Stack Atomic Audio-3.5 Base is a voice recognition and audio playback base designed for the Atom series controllers. It features an integrated ES8311 mono audio codec, MEMs microphone, and NS4150B power amplifier with a 3.5mm audio jack and 4-segment TRRS connector. This base supports full-duplex communication, making it ideal for voice assistant applications and smart home voice gateways.
