Latest Components
Manufacturer
Part #
Category
TAIYO YUDEN MAAS Automotive Multilayer Ceramic Capacitors PassivesDescription
TAIYO YUDEN MAAS Automotive Multilayer Ceramic Capacitors (MLCCs) are AEC-Q200 qualified capacitors with high reliability and RoHS/REACH compliance. These capacitors feature an external electrode and plating structure that contribute to the excellent soldering heat resistance. The MAAS MLCCs operate within a temperature range of -55°C to 125°C.
Manufacturer
Part #
Category
Teltonika SWM280000200 ConnectorsDescription
Teltonika SWM28x Managed Switches are high-capacity L2 managed switches with enhanced L3 capabilities, designed for network control, flexibility, and reliability. They feature a compact 1U rack design and support key industrial protocols, including PROFINET and EtherNet/IP. With 4 SFP slots and 24 Gigabit Ethernet ports, these switches are cloud-enabled and compatible with the Remote Management System (RMS).
Manufacturer
Part #
Category
Infineon Technologies TLE994x/5x PowerDescription
Infineon MOTIX™ TLE994x/5x 32-bit Motor Control SoCs are single-chip, 3-phase motor drivers with an Arm® Cortex®-M23 core and flash memory. These automotive-qualified SoCs offer cost-effectiveness for BLDC motor drive applications, such as pumps and fans. They support field-oriented control (FOC) and comply with ISO 26262 up to ASIL B.
Manufacturer
Part #
Category
Infineon Technologies IRS9103AXTSA1 SemiconductorsDescription
Infineon VCSEL REAL3™ Laser Diode Driver ICs are cost-effective, small-footprint ICs for Time-of-Flight (ToF) image sensors for fast-switching laser diodes or LEDs. They allow highly efficient conversion from electrical to optical power and support high modulation frequencies for automotive-grade applications. These drivers are suitable for various applications including LiDar systems and laser distance sensors.
Manufacturer
Part #
Category
Infineon Technologies Q-DPAK V2.1 PowerDescription
The Infineon Q-DPAK Full Bridge V2.1 Evaluation Board demonstrates optimal usage of Generation 2 CoolSiC™ 750V G2 SiC power MOSFETs in Q-DPAK packages. It is designed for fast switching and supports single pulses rather than continuous switching. The board includes four 750V CoolSiC switches in a full-bridge assembly along with corresponding gate drivers and DC-DC converters.
Manufacturer
Part #
Category
Infineon Technologies TDA38640A PowerDescription
The Infineon TDA38640A Evaluation Board evaluates the performance of the TDA38640A Switching Voltage Regulator IFX POL. It is a synchronous buck converter that steps down 12V in to 1.0V out, featuring an integrated PWM controller and efficient DC-DC regulation. This evaluation board provides a compact solution with high-efficiency power delivery.
Manufacturer
Part #
Category
STMicroelectronics EVSTDRVG611MC PowerDescription
The STMicroelectronics EVSTDRVG611MC Evaluation Board allows users to evaluate the STDRIVEG611 half-bridge GaN gate driver. It features a three-phase inverter board based on the STDRIVEG611 driver and the STM32G431RBT3 microcontroller, enabling sensorless field-oriented control for various motor applications. This compact board is designed for high efficiency and reliability in driving permanent magnet synchronous motors and brushless DC motors.
Manufacturer
Part #
Category
STMicroelectronics EV-VNF1248F PowerDescription
The STMicroelectronics EV-VNF1248F Evaluation Board facilitates the integration of a high-side switch controller with intelligent fuse protection into prototype circuitry. It supports a maximum current of 32A and includes essential electrical components for easy setup. This board is designed for automotive applications and simplifies connections to loads and microcontrollers.
Manufacturer
Part #
Category
Sensirion SEN65 SensorsDescription
Sensirion SEN65 Air Quality Sensors combine multiple sensors in an ideal form factor and can measure up to eight environmental parameters including PM1, PM2.5, and VOC Index. The innovative design allows for customization, simplifies integration, and reduces costs. It is suitable for applications requiring compliance with IAQ standards.
Manufacturer
Part #
Category
Sensirion SEN63C SensorsDescription
Sensirion SEN63C Air Quality Sensors combine multiple sensors in an ideal form factor and can measure up to seven environmental parameters including PM1, PM2.5, PM4, PM10, temperature, relative humidity, and VOCs. The innovative design simplifies integration, reduces costs, and allows for customization. It features a miniaturized, MEMS-based particulate matter sensing component.
