Latest Components
Manufacturer
Part #
Category
MEAN WELL DIP DC-DC Converters PowerDescription
MEAN WELL 3W to 20W Isolated, Regulated DIP DC-DC Converters are designed for power systems, instrumentation, industrial automation, and IoT applications. They feature an ultra-wide 8:1 input range, supporting input voltages from 9VDC to 75VDC, and are compatible with the DIP24 configuration for easy integration. These converters provide a reliable solution with natural convection cooling and EMI compliance.
Manufacturer
Part #
Category
ECS ECS-384-CDX-2482 PassivesDescription
ECS ECS-384-CDX-2482 Quartz Crystal is a high-performance quartz crystal designed for precision timing applications across a wide range of electronic devices. This crystal operates at a nominal frequency of 38.40MHz and supports low-power designs with a drive-level range of 50µW to 200µW. It ensures consistent performance across varying environmental conditions with a temperature range of -40°C to 105°C.
Manufacturer
Part #
Category
E-Switch RCA1913 ConnectorsDescription
E-Switch RCA1913 Rocker Switches are fully sealed with Nylon66 construction and offer a SPST or SPDT contact arrangement. These switches feature an ingress protection rating of IP68 and UL/ENEC certified electrical ratings up to 16A, making them suitable for various industries. They fit a 19mm x 13mm panel cutout and come with multiple terminal options.
Manufacturer
Part #
Category
Texas Instruments TPS61381-Q1 PowerDescription
The Texas Instruments TPS61381-Q1 is an automotive bidirectional boost converter/LDO charger designed for backup power systems. It supports a maximum voltage of up to 40V and integrates an I2C configurable LDO charger for various battery chemistries. This device is ideal for applications such as emergency calls (eCall) due to its robust features and compact design.
Manufacturer
Part #
Category
Texas Instruments SN74AC09/SN74AC09-Q1 SemiconductorsDescription
Texas Instruments SN74AC09/SN74AC09-Q1 Quad 2-Input AND Gates contain four independent 2-input AND gates with open-drain outputs. Each gate performs the Boolean function Y = A × B in positive logic. These devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Abracon ABM14 PassivesDescription
Abracon ABM14 Ultra-Miniature SMD Crystals are designed in a compact 1.0mm x 0.8mm x 0.33mm package, optimized for low plating load and ESR across a temperature range of -30°C to +85°C. They offer a frequency accuracy of ±10ppm and are available in standard frequencies of 40MHz, 59.97MHz, and 76.8MHz. Ideal for wearables and IoT applications, these crystals enhance performance for low energy systems.
Manufacturer
Part #
Category
STMicroelectronics VNF1248F PowerDescription
The STMicroelectronics VNF1248F High-Side Switch Controller offers a power MOSFET in a high-side configuration, designed for automotive applications. It features a 3.3V and 5V CMOS-compatible SPI interface for control and provides various protections and diagnostics. This component is ideal for implementing intelligent high-side switches in 12V, 24V, and 48V systems.
Manufacturer
Part #
Category
L-Com 184901784 PowerDescription
L-Com IEC C20 to IEC C19 Power Cords feature a C20 male connector on one end and a C19 female connector on the other. These cords are designed to handle high power loads with a maximum current rating of 20A and a capacity of up to 250V. They are suitable for various applications including IT, healthcare, and telecommunications.
Manufacturer
Part #
Category
L-Com PCS02L2-BLK-10F PowerDescription
L-Com NEMA 5-15 to IEC C19 Power Cords feature a NEMA 5-15 male connector on one end and a right-angle or left-angle C19 female connector on the other. These cords are built with 12 AWG conductors and are capable of handling up to 15A and 125V. Ideal for powering PCs, servers, and other devices, they are designed to withstand a temperature range from 3°C to 105°C.
Manufacturer
Part #
Category
L-Com NEMA 5-15 to IEC C21 PowerDescription
L-Com NEMA 5-15 to IEC C21 Power Cords include a NEMA 5-15 male connector on one end and a C21 female connector on the other. These cords are designed for high power loads with a maximum current rating of 15A and a capacity of up to 125V. They are suitable for various applications including IT, telecommunications, and industrial manufacturing.
