NewsPR News

Nisshinbo Introduces NL9000 1,000 V High-Voltage Monitor IC

The new IC integrates precision input resistors for high-voltage sensing, maintaining ±0.7% attenuation accuracy without external resistor matching.

1 (1).png

Nisshinbo Micro Devices has introduced the NL9000, a high-voltage monitor IC for electric vehicle power systems. The device supports continuous input voltages up to ±1,000 V and integrates a sensing circuit that would otherwise require multiple discrete components.

Nisshinbo says the integrated design reduces the number of components by approximately 90% and PCB area by 80% compared with a discrete implementation. The NL9000 also maintains its specified measurement accuracy across the full operating temperature range of −40°C to +125°C.

The IC is aimed at e-Axle systems, power control units (PCUs), inverters, battery management systems (BMS) and onboard chargers (OBC), where high-voltage measurement is used for monitoring and feedback control.

Replacing Discrete High-Voltage Sensing Circuits

The NL9000 incorporates high-value, high-accuracy input resistors that convert high voltages into levels suitable for microcontroller (MCU) inputs. Integrating these resistors on-chip removes the need for external resistor selection, matching and accuracy adjustment.

In conventional discrete circuits, maintaining the required attenuation accuracy over temperature and time can be difficult. Nisshinbo says its integrated input resistors are less susceptible to temperature-induced variation and long-term drift, while achieving attenuation accuracy of ±0.7% without resistor matching.

The NL9000 is offered with four attenuation ratios. The A version provides 1/100, followed by 1/200 for the B version, 1/140 for C and 1/160 for D. Typical input resistance is 36 MΩ, with a minimum of 31 MΩ.

The different attenuation options allow the IC to be used in voltage-monitoring circuits with different input ranges. Nisshinbo identifies inverter and boost-converter control as applications where accurate high-voltage detection and feedback are required.

Voltage Ratings and Automotive Qualification

The NL9000 has a continuous maximum input voltage rating of ±1,000 V and an absolute maximum rating of ±1,400 V. Its output voltage range is 0 to 5 V when supplied at 5 V, while the specified AC insulation withstand voltage is 2,500 Vrms for one minute.

The device is AEC-Q100 Grade 1 qualified and housed in an 8.1 × 8.1 × 1.80 mm PMAP11-GP package. Nisshinbo specifies a minimum creepage distance of 5 mm, with insulation material rated at CTI ≥600 V and a UL 94 V-0 flammability rating.

Sample orders for the NL9000 began on November 17, 2026, with Nisshinbo stating a monthly production capability of 200,000 units. The reference price is JPY 440 per unit for 1,000-piece orders, including Japanese consumption tax.

Learn more and read the original announcement at nisshinbo-microdevices.co.jp.


Technology Overview

The Nisshinbo NL9000 is a high-voltage monitor IC for electric vehicle power systems, integrating precision input resistors to replace discrete voltage-sensing circuits. It supports continuous input voltages up to ±1,000 V, with ±0.7% attenuation accuracy across −40°C to +125°C and four attenuation-ratio options. The AEC-Q100 Grade 1 device is supplied in an 8.1 × 8.1 × 1.80 mm PMAP11-GP package. Nisshinbo reports approximately 90% fewer components and 80% less PCB area compared with discrete implementations.

FAQs

How does the NL9000 reduce the number of components required for high-voltage sensing?

The NL9000 integrates high-value precision input resistors that would otherwise require discrete components. Nisshinbo reports approximately 90% fewer components and an 80% reduction in PCB area, without the need for external resistor matching.

What voltage ratings and measurement accuracy does the NL9000 offer?

The device supports continuous input voltages up to ±1,000 V, with an absolute maximum rating of ±1,400 V. Attenuation accuracy is ±0.7% across the −40°C to +125°C operating temperature range.

What applications is the NL9000 designed for?

Applications include electric vehicle e-Axle systems, power control units, inverters, battery management systems and onboard chargers. It can also be used for high-voltage detection and feedback in inverter and boost-converter control.

Keep reading

Related news

All news
News18/11/2026
SchurterSCHURTER Introduces FMES EMC Filters Rated Up to 1,000 V DC and 600 ARead update
News17/11/2026
SpaceXSpaceX Just Caught Starship Returning From OrbitRead update
News17/11/2026
Toshiba Electronics Europe GmbHToshiba Introduces TCR5FF LDO Regulators with Faster Load Transient ResponseRead update
Join The Component Club

Keep up with the components and technology shaping electronics.

Join the club for member features, engineering discussion and easier access to the latest Component Club content.