NewsPR News

Murata Introduces MGJ2T2 Isolated DC-DC Converters for SiC Gate Drives

The new 2 W SIP converters provide bipolar outputs for SiC MOSFET gate drivers, with low isolation capacitance and high common-mode transient immunity.

1.png

Murata Manufacturing has introduced the MGJ2T2 series of 2 W SIP isolated gate-drive DC-DC converters for high-voltage silicon carbide (SiC) power applications. The new series combines 6 kV DC isolation with 2.5 pF isolation capacitance and common-mode transient immunity (CMTI) exceeding 200 kV/µs.

The MGJ2T2 series operates from a 24 V input and provides +18 V/−3 V bipolar outputs for SiC MOSFET gate drivers. The positive rail provides the voltage required to turn the power device on, while the negative rail supports reliable turn-off.

Isolation Performance and Block-Coil Construction

Fast switching in SiC-based power converters produces rapid voltage changes that can couple electrical noise across the isolation barrier between the power stage and its control circuitry. The low 2.5 pF isolation capacitance of the MGJ2T2 series limits this coupling, while CMTI of more than 200 kV/µs enables it to tolerate rapid common-mode voltage transitions.

Murata achieves this performance using its proprietary Block-Coil technology. Separate windings are formed on solid insulating formers, providing physical separation between the primary and secondary circuits while reducing the capacitance between them.

The construction provides more than 8 mm of creepage and clearance, while the solid insulation barrier provides high partial-discharge tolerance.

Insulation Ratings and Applications

The MGJ2T2 series supports reinforced insulation at working voltages up to 800 Vrms, or basic insulation up to 1,600 Vrms, and is tested to withstand 6 kV DC across the isolation barrier. The insulation system is designed to meet IEC 60664-1.

The same characteristics are relevant to emerging solid-state transformer (SST) architectures. Each switching element requires an isolated gate-drive power supply, making isolation and noise immunity between the individual power stages and their control circuitry particularly important.

The MGJ2T2 series operates over a temperature range of −40°C to +125°C and is supplied in an SIP package. Target applications include ESS and BESS, microgrids, motor drives, industrial automation, EV charging and heat pumps.

Learn more and read the original announcement at murata.com.


Technology Overview

The Murata MGJ2T2 series comprises 2 W SIP isolated DC-DC converters for SiC MOSFET gate-drive power supplies. Operating from a 24 V input, the modules provide +18 V/−3 V bipolar outputs with 6 kV DC isolation, 2.5 pF isolation capacitance and CMTI exceeding 200 kV/µs. Murata's Block-Coil technology provides more than 8 mm creepage and clearance, supporting reinforced insulation at working voltages up to 800 Vrms.

FAQs

What are the input and output voltages of the MGJ2T2 series?

The MGJ2T2 converters operate from a 24 V input and provide +18 V/−3 V bipolar outputs for SiC MOSFET gate drivers, with 2 W output power.

What isolation performance does the MGJ2T2 series provide?

The series offers 6 kV DC isolation, 2.5 pF isolation capacitance and CMTI exceeding 200 kV/µs. It supports reinforced insulation up to 800 Vrms or basic insulation up to 1,600 Vrms working voltage.

What applications are the MGJ2T2 converters designed for?

Applications include energy storage systems, microgrids, motor drives, industrial automation, EV charging, heat pumps and solid-state transformers.

Keep reading

Related news

All news
News17/11/2026
SpaceXSpaceX Just Caught Starship Returning From OrbitRead update
News17/11/2026
Toshiba Electronics Europe GmbHToshiba Introduces TCR5FF LDO Regulators with Faster Load Transient ResponseRead update
News16/11/2026
MurataMurata Introduces SCI36LT Intelligent IMUs with Embedded MCURead update
Join The Component Club

Keep up with the components and technology shaping electronics.

Join the club for member features, engineering discussion and easier access to the latest Component Club content.