Murata Introduces SCI36LT Intelligent IMUs with Embedded MCU
The new family includes a version with integrated sensor fusion for orientation sensing and a programmable variant for custom software development.
Murata Manufacturing has introduced the SCI36LT Series, a family of intelligent inertial measurement units (IMUs) combining high-performance six-degree-of-freedom (6-DoF) MEMS sensing with an embedded microcontroller (MCU) in a compact surface-mount package.
The SCI36LT family brings together a high-performance MEMS sensor, an embedded MCU, supporting electronics and passive components within a single platform. Sensor data processing can be performed directly within the component rather than relying on a separate host processor.
Two Variants for Sensor Fusion and Custom Software
The SCI36LT-K01 integrates Murata's proprietary sensor fusion algorithm, running on the embedded MCU to calculate pitch, roll and relative yaw. The device incorporates a ±490°/s gyroscope and ±16 g accelerometer, with calculated orientation available in either Euler angle or direction cosine matrix (DCM) format.
Configurable algorithm dynamics and output data rates allow sensor behavior to be optimized for different motion profiles and system requirements. Integrated calibration features also support module-level calibration after the sensor has been incorporated into the end system, simplifying compensation at PCB or module level.
The SCI36LT-K02 uses the same integrated IMU and MCU architecture but does not include Murata's sensor fusion algorithm. Instead, customers can program the embedded MCU with their own software, allowing application-specific processing to be performed directly within the sensor component rather than on the host system.
Compact LGA Package and Industrial Applications
Measuring 11.2 × 9.2 × 2.9 mm, the SCI36LT family integrates Murata's MEMS technology with an MCU, passive components and crystal resonator in a single compact LGA package. The devices support a 3.1 V to 5.5 V supply and operate across a −40°C to +85°C temperature range.
Applications include grade control for heavy machinery and excavators, dynamic inclination sensing in construction machinery and industrial equipment, and support for real-time kinematic (RTK) positioning in surveying equipment and autonomous systems.
Other applications include motion sensing in humanoid robots and commercial drones used in agriculture, infrastructure and facility management, civil engineering, construction and logistics.
Samples of the SCI36LT-K01 and SCI36LT-K02 are available now, with mass production scheduled to begin in Q1 2027.
Learn more and read the original announcement at murata.com.
Technology Overview
The Murata SCI36LT Series combines 6-DoF MEMS inertial sensing with an embedded MCU in an 11.2 × 9.2 × 2.9 mm LGA package. The SCI36LT-K01 uses Murata's proprietary sensor fusion algorithm to calculate pitch, roll and relative yaw, while the SCI36LT-K02 supports custom software development. The devices incorporate a ±490°/s gyroscope and ±16 g accelerometer, operating from a 3.1 V to 5.5 V supply over a −40°C to +85°C temperature range.
FAQs
What is the difference between the SCI36LT-K01 and SCI36LT-K02?
The SCI36LT-K01 includes Murata's proprietary sensor fusion algorithm for orientation calculations. The SCI36LT-K02 uses the same IMU and MCU architecture but supports customer-developed software running directly on the embedded MCU.
What orientation data does the SCI36LT-K01 provide?
The SCI36LT-K01 calculates pitch, roll and relative yaw, with output available in Euler angle or direction cosine matrix format. Algorithm dynamics and output data rates are configurable.
What applications are the SCI36LT Series designed for?
Applications include heavy machinery grade control, industrial inclination sensing, su
Related news
Keep up with the components and technology shaping electronics.
Join the club for member features, engineering discussion and easier access to the latest Component Club content.