NewsPR News

ROHM Introduces BM85060FV Totem-Pole PFC Controller for GaN Power Supplies

The new controller targets 300–500 W AC-DC power supplies, with a claimed system-level efficiency of 99% and reduced standby power consumption.

1 (1).png

ROHM has developed the BM85060FV, a totem-pole power factor correction (TP-PFC) controller IC for compact, high-efficiency AC-DC power supplies. The controller operates in the MHz band, supporting high-frequency switching with gallium nitride (GaN) HEMTs.

The new IC is intended for power supplies in the 300–500 W range, including AC adapters, consumer electronics such as projectors, and compact industrial equipment. It addresses requirements for smaller power supplies with high operating efficiency and low no-load power consumption.

Conventional MCU-based TP-PFC control presents challenges in power consumption, circuit size, cost and high-frequency switching with GaN HEMTs. ROHM has developed the BM85060FV as a dedicated controller for this type of power conversion.

High-Frequency GaN Switching

The BM85060FV is designed for bridgeless totem-pole PFC circuits, which replace the diode bridge used in conventional PFC designs with switching elements to reduce conduction losses.

Its ability to operate in the MHz band supports high-frequency switching with GaN HEMTs. Higher switching frequencies also permit the use of smaller peripheral components, reducing the overall footprint of the power supply circuit.

ROHM reports that the BM85060FV enables system-level efficiency of 99% in 300–500 W-class AC-DC power supplies. The combination of GaN switching and a bridgeless PFC circuit is intended for applications where power conversion efficiency and available board space are important design considerations.

Low Standby Current and Protection

Alongside its high-frequency operation, the BM85060FV has a no-load current consumption of 150 µA, approximately 70% lower than the standard products used in ROHM's comparison.

Low no-load consumption is particularly relevant to external power supplies subject to energy efficiency requirements such as DOE Level 7 and the European CoC Tier 2.

The controller also incorporates protection functions required for AC-DC power supplies, including a lightning surge protection circuit.

ROHM offers a 330 W TP-PFC evaluation board featuring the BM85060FV for the development of AC-DC power supplies using GaN HEMTs.

The BM85060FV is supplied in an SSOP-B20 package. Sales began in November 2026, with a sample price of $4.30 per unit, excluding tax. The device is also available through distributors including DigiKey, Mouser and Farnell.

Learn more and read the original announcement at rohm.com.


Technology Overview

The ROHM BM85060FV is a totem-pole power factor correction controller IC designed for bridgeless PFC circuits using GaN HEMTs. It supports MHz-band switching in 300–500 W AC-DC power supplies, with a claimed system-level efficiency of 99%. The controller has a no-load current consumption of 150 µA and incorporates protection functions including lightning surge protection. A 330 W evaluation board is available.

FAQs

What is the BM85060FV designed for?

The BM85060FV is a totem-pole PFC controller for compact 300–500 W AC-DC power supplies. Applications include AC adapters, projectors and compact industrial equipment.

How does the BM85060FV support high-efficiency GaN power supplies?

The controller supports MHz-band switching with GaN HEMTs in a bridgeless totem-pole PFC circuit. This topology replaces the conventional diode bridge with switching elements to reduce conduction losses.

What is the BM85060FV's no-load current consumption?

ROHM specifies a no-load current of 150 µA, approximately 70% lower than its reference products. The controller also incorporates protection functions, including lightning surge protection.

Keep reading

Related news

All news
News19/11/2026
The University of Hong Kong (HKU)Researchers Develop Single-Motor Drone That Uses Its Own Rotation to NavigateRead update
News19/11/2026
Toshiba Electronics Europe GmbHToshiba Introduces TLX9909 Photocoupler with Adjustable MOSFET Turn-Off TimeRead update
News19/11/2026
InfineonInfineon Introduces HybridPACK HD Power Module for Electric Commercial VehiclesRead update
Join The Component Club

Keep up with the components and technology shaping electronics.

Join the club for member features, engineering discussion and easier access to the latest Component Club content.