Latest News
The latest electronics news, featuring updates and announcements from leading companies in the electronic components industry. Stay informed on product releases, industry trends, and market insights.
Filtering by tag: "Automotive Electronics"
Clear tag filterTexas Instruments Adds EIS Technology to 26-Cell Battery Monitor
Texas Instruments has introduced the BQ79826Z-Q1 battery monitor with an integrated EIS engine and support for up to 26 series-connected cells. The device delivers less than 2 mV voltage accuracy, supports ASIL-D functional safety requirements, and targets EV and energy storage battery management systems.
Read MoreMelexis Introduces MLX92344 Hall Switch with Four Output States Over Two Wires
Melexis has introduced the MLX92344 automotive Hall switch. The device supports up to four output states over a two-wire interface, programmable current outputs from 3mA to 28mA, and operation from -40°C to +150°C.
Read MoreToshiba Introduces 40V Automotive MOSFETs in SOP Advance(EWF) Package
Toshiba has introduced the XPMR5904PB, XPMR7404PB, and XPMR8504PB 40V automotive MOSFETs. The devices use the new SOP Advance(EWF) package, support drain currents up to 180A, and deliver lower on-resistance and thermal impedance.
Read MoreDiodes Combines USB PD3.1 And Buck Control In Automotive USB-C IC
Diodes has introduced the APK43070Q, an automotive-qualified USB PD3.1 controller with integrated buck conversion, 140 W charging support, and intelligent power sharing across up to eight USB-C ports.
Read MoreTDK Adds Dual-Output 3D Hall Sensors For Motor Direction Detection
TDK has introduced the Micronas HAL 13xy family, a dual-output 3D Hall-effect switch sensor for automotive and industrial motor control with quadrature outputs, ASIL B readiness, and operation up to 170 °C.
Read MoreVishay Targets EV Isolation Stages with New Automotive Optocouplers
Vishay has introduced the VOWA617A and VOWA618A Automotive Grade optocouplers for EV and solar inverter isolation stages, featuring 11 mm creepage distance, 1500 Vpeak VIORM, and CTI 600 insulation performance.
Read MoreToshiba SmartMCD Integrates MCU and MOSFETs for BLDC Drives
Toshiba has started sampling the TB9M040FTG SmartMCD device, integrating an Arm Cortex-M23 MCU, MOSFETs, LIN transceiver, and BLDC motor driver into a compact package for automotive motor control systems below 40 W.
Read MoreDiodes Targets Automotive PCIe 5.0 Links With New ReDriver
Diodes Incorporated has launched the PI3EQX32904Q, a four-channel 32Gbps automotive ReDriver for PCIe 5.0, SAS4, and CXL links in smart cockpit and ADAS compute platforms.
Read MoreWürth Elektronik Launches WE-SFIA Flat-Wire Inductors
Würth Elektronik has launched the WE-SFIA SMT flat-wire inductor series for automotive DC/DC converters and filter chokes, with up to 158 A saturation current, 1.0 mΩ typical DCR, and operation from -40°C to +180°C.
Read MoreKYOCERA AVX Targets 48V Systems With New MLVs
KYOCERA AVX expands TransGuard VT Series with 48V multilayer varistors for automotive systems, offering high-temperature operation, 56V working voltage, and up to 1,500A surge handling.
Read More