Bel Fuse Introduces 2250895-1 SFP+ Copper Transceiver
The new TRP transceiver uses Marvell's MV-CUX3610 PHY to extend 10GBASE-T connections to 100 meters while reducing power consumption by 35%.
Bel Fuse has introduced the 2250895-1, a next-generation TRP SFP+ copper transceiver module for high-speed Ethernet network applications. Developed using Marvell Technology's MV-CUX3610 PHY, the new transceiver supports 10GBASE-T connections over longer cable distances with lower power consumption than the previous generation.
The 2250895-1 supports 10G, 5G, 2.5G, 1G and 100M BASE-T network speeds, covering equipment operating across multiple Ethernet standards. The module is intended for applications requiring high-speed Ethernet connectivity using existing SFP+ ports and copper infrastructure.
Extended Copper Reach
The 2250895-1 supports 10GBASE-T connections up to 100 meters over Cat 6a or better cabling. For 5GBASE-T and 2.5GBASE-T connections, the maximum reach extends to 120 meters over Cat 5e or better cabling.
Rather than replacing copper infrastructure with fiber, network operators can use existing cabling with SFP+ slots to connect equipment through standard copper connections.
The hot-pluggable module also supports cable diagnostics and is compliant with IEEE 802.3an/bz/ab/u and SFF-8431/SFF-8432 MSA specifications. Custom EEPROM support is available for integration with existing Ethernet equipment.
Power Consumption and Thermal Management
Alongside the longer cable reach, the 2250895-1 consumes between 1.3 W and 1.5 W, compared with 2.3 W to 2.5 W for the previous generation. Bel reports a 35% reduction in transceiver power consumption.
The lower power consumption is accompanied by built-in thermal management capabilities, including an on-die thermal sensor with alarm and warning thresholds. These features support deployment in networking environments where thermal management and available power are important considerations.
The 2250895-1 operates across a commercial case temperature range of 0°C to 70°C.
The new transceiver is part of Bel Fuse's TRP SFP+ portfolio for network infrastructure applications.
Learn more and read the original announcement at belfuse.com.
Technology Overview
Bel Fuse's TRP 2250895-1 is a hot-pluggable SFP+ copper transceiver based on Marvell's MV-CUX3610 PHY. It supports 10GBASE-T connections up to 100 meters over Cat 6a cabling and 5GBASE-T and 2.5GBASE-T connections up to 120 meters over Cat 5e. The module consumes 1.3–1.5 W, incorporates an on-die thermal sensor and operates from 0°C to 70°C.
FAQs
What Ethernet speeds does the Bel Fuse 2250895-1 support?
The transceiver supports 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-T connections, covering network equipment operating at different Ethernet speeds.
What cable lengths does the 2250895-1 support?
The module supports 10GBASE-T connections up to 100 meters using Cat 6a or better cabling. For 5GBASE-T and 2.5GBASE-T, connections can reach 120 meters over Cat 5e or better cabling.
How much power does the 2250895-1 consume?
The 2250895-1 consumes between 1.3 W and 1.5 W, approximately 35% less than the previous generation according to Bel Fuse. It also incorporates an on-die thermal sensor with alarm and warning thresholds.
Related news
Keep up with the components and technology shaping electronics.
Join the club for member features, engineering discussion and easier access to the latest Component Club content.