News | The Component Club

Advanced Energy LPP200 AC-DC Supplies Target Sub-1 Inch Systems

Advanced Energy introduces the LPP200 series, a 200 W low-profile AC-DC power supply measuring just 0.75 inches high and designed for compact medical and industrial equipment requiring high power density and strict safety compliance.

Advanced Energy, LPP200, AC-DC Power Supply, Medical Power Supply, Industrial Power Supply, Low Profile Power Supply, Open Frame Power Supply, Power Density, Embedded Power, Medical Electronics, IEC 60601-1, IEC 62368, Compact Power Conversion, Patient Monitor Power, Infusion Pump Power, Industrial Equipment Power, Power Electronics

Keysight XR8 Scope Architecture Pushes High Speed Validation Forward

Keysight’s Infiniium XR8 oscilloscope introduces a new front end with integrated ADC and DSP processing, reducing noise, accelerating compliance testing, and improving workflow efficiency for high speed digital validation.

Keysight, Infiniium XR8, oscilloscope, high speed digital, signal integrity, jitter analysis, USB4v2 testing, DisplayPort 2.1, DDR5 validation, ADC design, DSP engine, compliance testing, electronic design, measurement tools, test and measurement, lab workflow

ABLIC S-19760/1 Automotive Shunt Reference at ±0.1%

ABLIC S-19760 and S-19761 automotive shunt reference ICs deliver ±0.1% output accuracy and low temperature drift for precise ADC reference voltage in EV inverters and automotive control systems.

ABLIC, S-19760, S-19761, automotive reference IC, shunt reference, ±0.1% voltage reference, 20ppm per degree, ADC reference voltage, automotive electronics, EV inverter control, battery management system, precision analog, low noise reference, 28µVrms noise, AEC-Q100, PPAP, automotive sensor systems, voltage stability, mixed signal automotive, Minato Tokyo semiconductor

JAE DW15 Floating Connector Enables Autonomous Robot Charging

JAE DW15 Series floating connector supports autonomous charging of AGVs and AMRs with 60A at 250V DC capability, double-floating misalignment compensation, busbar contact design, and 10,000 mating cycle durability.

JAE, DW15 Series, floating connector, autonomous charging connector, AGV charging, AMR docking connector, 60A DC connector, 250V DC connector, busbar contact, double floating mechanism, robot power connector, warehouse automation hardware, industrial charging system, 10, 000 cycle durability, silver plated contacts, autonomous mobile robots

Samtec’s 0.80 mm Edge-Card Sockets Target High-Speed Modular Designs

Samtec’s HSEC8 0.80 mm edge-card sockets use machined contacts to support high-speed, high-cycle modular systems.

Samtec, HSEC8, Generate series, edge card socket, 0.80 mm pitch, Edge Rate contact, high speed connector, signal integrity, modular systems, right angle connector, vertical connector, edge mount, power signal combo, PCB connector, datacom, telecom equipment, instrumentation, industrial electronics

YAGEO’s Multi-Band GNSS Timing Antenna Targets Outdoor Synchronization Systems

YAGEO’s tri-band GNSS timing antenna supports L1, L2, and L5 operation for outdoor synchronization systems.

YAGEO Group, GNSSL125DM26NM, GNSS antenna, L1 L2 L5 GNSS, timing antenna, synchronization systems, RF design, outdoor enclosure, N-type connector, ceramic patch antenna, low noise amplifier, GNSS timing, network clocks, GNSSDO, base stations, small cell, smart grid, infrastructure timing, RF interference filtering

Toshiba Adds 21 New XSON6 Devices to Its Low-Voltage Logic Series

Toshiba adds 21 new low-voltage logic devices in the XSON6 package to support clean signal translation in compact mixed-voltage systems.

toshiba, 7ul series, logic ic, voltage translation, xson6, level shifting, 7ul1g, 7ul1t, mixed-voltage systems, embedded design, iot hardware, edge ai

Melexis Launches Automotive-Grade MLX90382 Encoder for E-Chassis Systems

Melexis introduces the MLX90382 magnetic encoder with 16-bit resolution, zero latency and strong stray-field immunity for advanced automotive E-chassis systems.

melexis, mlx90382, magnetic encoder, position sensing, hall sensor, triaxis, automotive sensors, e-chassis, steer-by-wire, brake-by-wire, active suspension, asil d, iso 26262, motor control, digital feedback

Microchip Optical Ethernet PHYs Combine Precise Timing and Built-In Security

Microchip introduces Optical Ethernet PHYs with sub-nanosecond synchronisation and MACsec encryption for deterministic, long-reach 10–25 Gbps networks.

microchip, optical ethernet phy, ptp, macsec, ieee 1588, ieee 802.1ae, 25 gbps ethernet, 10 gbps ethernet, lan8044, lan826x, industrial automation, data centres, fibre networks, deterministic ethernet, network security

Diodes PI2DPT1021Q Boosts Signal Integrity for Automotive USB and DisplayPort Systems

Diodes Incorporated releases the PI2DPT1021Q, a 10 Gbps retimer that restores USB 3.2 and DisplayPort 1.4 signals for automotive and industrial platforms.

diodes incorporated, pi2dpt1021q, retimer, usb 3.2, displayport 1.4, signal integrity, automotive connectivity, aec-q100, ctle, i²c configuration, x1-qfn package

Advanced Energy LPP200 AC-DC Supplies Target Sub-1 Inch Systems

Keysight XR8 Scope Architecture Pushes High Speed Validation Forward

ABLIC S-19760/1 Automotive Shunt Reference at ±0.1%

JAE DW15 Floating Connector Enables Autonomous Robot Charging

Samtec’s 0.80 mm Edge-Card Sockets Target High-Speed Modular Designs

YAGEO’s Multi-Band GNSS Timing Antenna Targets Outdoor Synchronization Systems

Toshiba Adds 21 New XSON6 Devices to Its Low-Voltage Logic Series

Melexis Launches Automotive-Grade MLX90382 Encoder for E-Chassis Systems

Microchip Optical Ethernet PHYs Combine Precise Timing and Built-In Security

Diodes PI2DPT1021Q Boosts Signal Integrity for Automotive USB and DisplayPort Systems

Latest News

Information

Manage

Enquire