News | The Component Club

TDK B82722V6 Choke Supports 1250 V DC Designs

TDK’s B82722V6B040 common-mode choke series supports 1250 V DC converter and drive designs in a compact vertical package, with inductance options from 3.3 mH to 22 mH and rated currents up to 3.0 A for high-voltage EMI filtering.

TDK, EPCOS, common-mode choke, EMI choke, high-voltage choke, ring-core choke, power converter, motor drive, switch-mode power supply, SiC, GaN, EMI suppression, 1250 V DC, 630 V AC, industrial power, common-mode filter, power electronics, wave soldering, passive components, B82722V6B040

TDK-Lambda PFE1500FB Brings 1500 W To Sealed Power Designs

TDK-Lambda’s PFE1500FB is a 1500 W AC-DC power module built for sealed and low-airflow systems, combining an 85 to 305 Vac input range, PMBus programmability, 48 V class output, and a baseplate-mounted format for industrial power designs.

TDK, TDK-Lambda, PFE1500FB, AC-DC power module, AC-DC converter, power supply, industrial power, building automation, lighting equipment, PMBus, 277 Vac, sealed enclosure power, conduction cooling, semiconductor fabrication, LED display power, RF power amplifier, test and measurement, 48 V power supply

TDK Noise Filter Targets Audio Lines Without the Usual Tradeoff

TDK’s MAF0603GWY series targets RF noise on audio lines in phones and wearables, combining strong attenuation above 5 GHz with lower distortion and lower resistance than conventional chip-bead approaches.

TDK, MAF0603GWY, EMC components, noise suppression filter, audio line filter, ferrite filter, EMI suppression, RF noise, smartphones, wearables, tablets, Bluetooth, Wi-Fi, 5G, 6G, audio distortion, ferrite material, passive components, consumer electronics, signal integrity

TDK MT40 ThermoFuse Varistor Handles 50 kA Surges

TDK introduces the MT40 ThermoFuse varistor series with integrated thermal disconnect and surge handling capability up to 50 kA for industrial power and surge protection systems.

TDK, MT40 varistor, ThermoFuse varistor, surge protection, MOV varistor, surge protection device, SPD components, industrial surge protection, photovoltaic surge protection, telecom power protection, UL1449 surge protection, power electronics protection, high energy surge suppression, MOV thermal protection, transient voltage protection

TDK HWS3000GT4 Extends Three Phase Power Flexibility In Industrial Systems

TDK has expanded its HWS3000 programmable AC DC power supply series with the HWS3000GT4, offering a 340 to 528 Vac three phase input, full CV and CC programmability, compact power density and scalable operation for industrial and test systems.

TDK, TDK Lambda, HWS3000, HWS3000GT4, AC DC power supply, three phase power, programmable power, industrial power, automation systems, semiconductor tools, RF amplifiers, laser systems, MODBus control, CV CC programmable, power electronics

TDK B43655 and B43656 DC Link Capacitors for EV On-Board Chargers

TDK’s B43655 and B43656 DC link capacitors bring compact sizing, high ripple tolerance and base-cooling optimization to 800V EV on-board chargers, supporting reliable high-power operation.

TDK, B43655, B43656, DC link capacitor, EV chargers, on board charger, OBC capacitor, aluminum electrolytic capacitor, high ripple current, 800V battery systems, base cooling design, forced cooling capacitor, AEC Q200, snap in capacitor, low ESR capacitor, high voltage capacitor, e mobility power, EV power electronics, capacitor thermal performance

TDK NTCSP Thermistors Push to 175 C Automotive Operation

TDK expands its NTCSP automotive NTC thermistor series to 175 C operation with AgPd terminations for conductive glue mounting, AEC Q200 qualification, and compact 1.6 x 0.8 mm packaging for power modules and high temperature sensing.

TDK, NTC thermistor, NTCSP series, automotive temperature sensor, AEC Q200, high temperature electronics, 175 C operation, conductive glue mounting, AgPd terminals, power semiconductor monitoring, EV power module, ABS electronics, transmission control, engine electronics, thermal compensation, B constant, 10k thermistor, 100k thermistor

TDK’s μPOL FS1525 Pushes Vertical Power Delivery Toward 200 A Density

TDK’s FS1525 μPOL module delivers 25 A per unit and scales to 200 A for vertical power delivery, integrating magnetics, MOSFETs and control in a compact package for AI, FPGA and data center platforms.

TDK, FS1525, μPOL, vertical power delivery, DC DC module, point of load, 25A converter, 200A scaling, AI processors, FPGA power, ASIC power, low ripple design, transient response, PMBus telemetry, I2C control, embedded power, server power, data center hardware, power density, chip embedded packaging

TDK Expands Ferrite Core Range for High-Power Industrial Applications

TDK launches an industry-leading lineup of large-size ferrite cores for EVs, renewables, traction systems, and more.

TDK, Ferrite Cores, Power Electronics, Renewable Energy, Railway, EV Charging, Welding Equipment, UPS, Magnetic Design, Passive Components

TDK Launches edgeRX Vision for High-Speed AI Defect Detection at the Edge

Meta Description: TDK introduces edgeRX Vision, an AI-powered defect detection system capable of inspecting 2,000 parts per minute with sub-millimetre precision.

TDK, EDGERX VISION, FACTORY AUTOMATION, AI INSPECTION, EDGE AI, ELECTRONICS MANUFACTURING, DEFECT DETECTION, MACHINE VISION, AOI, MLCC, SENSORS

TDK B82722V6 Choke Supports 1250 V DC Designs

TDK-Lambda PFE1500FB Brings 1500 W To Sealed Power Designs

TDK Noise Filter Targets Audio Lines Without the Usual Tradeoff

TDK MT40 ThermoFuse Varistor Handles 50 kA Surges

TDK HWS3000GT4 Extends Three Phase Power Flexibility In Industrial Systems

TDK B43655 and B43656 DC Link Capacitors for EV On-Board Chargers

TDK NTCSP Thermistors Push to 175 C Automotive Operation

TDK’s μPOL FS1525 Pushes Vertical Power Delivery Toward 200 A Density

TDK Expands Ferrite Core Range for High-Power Industrial Applications

TDK Launches edgeRX Vision for High-Speed AI Defect Detection at the Edge

Latest News

Information

Manage

Enquire